Table of Contents
Advertisement
6
en | Monitor Remote Control Functions (Bosch)
4
Monitor Remote Control Functions (Bosch)
This section details the functions and the usage of the Bosch remote control.
Button
AUTO
MEM
MON
CAM
AUX
MENU
RST
CLR
ON
OFF
F01U029703 | 1.0 | 2006.07
Function
Switches between images from the
auxiliary video to the surveillance video
when motion is detected. The auxiliary
video source for each mode is:
UMS-20xxxA: Video In
UMS-20xxxB: Memory card reader
Saves current operating mode during
Sleep mode or power failures. Does
not save operating mode when the unit
is turned off with this remote control.
Activates the On-screen Display (OSD)
menu for the LCD panel.
Displays ONLY video from the internal
CCTV camera (disables switching from
CCTV video to auxiliary video).
Moves the cursor up in an OSD menu.
Displays ONLY a JPG image or video
from an external source, depending on
the model number (disables switching
from auxiliary video to the internal
CCTV camera).
Moves the cursor left or decreases
item values in an OSD menu.
Displays the OSD. Pressing the MENU
button returns you to the Main menu
from anywhere in the OSD menus.
Moves the cursor right or increases
item values in an OSD menu.
Reserved for future use.
Moves the cursor down in an OSD
menu.
Clears any keystrokes.
Returns the display from CAM mode
only to Standby mode. Press the AUTO
or AUX to select these modes if pre-
ferred.
Turns the display to Standby mode,
but the internal camera remains on.
Installation Manual
UMS Series Public View System
Bosch Security Systems, Inc.
Advertisement
Table of Contents
