Remote Control; Remote Control Battery Installation - Bosch UML-463-90 User Manual

High Performance HD LED Monitor
3.4

Remote control

1
2
6
7
3 8
9
4
10
5
11
3.5

Remote Control Battery Installation

1.
2.
3.
Figure 3.6: Remote Control Battery Replacement
Note: Replace batteries when required or at least once a year. Dispose of used batteries
properly.
Bosch Security Systems
Ref. Button Description
1 POWER Turns power on and off.
ON/OFF
2 Input Selects a signal source to display.
3 Exit Exits the OSD menu.
4 Arrow Keys Moves the cursor down, up, left, and right in the OSD.
Vol + / Vol - Increases/decreases audio volume.
5 Enter. Accepts a selection in an OSD menu.
6 Info Displays the settings of the selected input.
7 Numeric Function as numeric buttons when the OSD menu is
buttons active.
(1-9)/Input Functions as input source buttons when the OSD menu
source is inactive.
NOTE: SDI and MULTIMEDIA functions are not available
with this display.
8 MENU Displays the OSD Main menu. Press to return to the
Main menu from anywhere in the OSD menus.
9 Numeric Performs as a numeric button when the OSD menu is
buttons active.
(0)/MUTE Mutes the sound when the OSD menu is inactive.
10 Up/down keys Moves the cursor up and down in the OSD.
11 Multi-media No function.
keys
Turn the remote over (buttons facing down) and push down on the cover and slide it off.
Insert two (2) new AAA alkaline batteries, matching the batteries to the (+) and (-) marks
inside the battery case.
Slide the battery cover back into place.
1
2
User Manual
Access and connections | en
1
2
2013.07 | v1.0 | F.01U.286.147
15