Table of Contents
Advertisement
UMS Series Public View System
3
Installing the UMS Series
This section provides instructions for installing and configuring the UMS Series.
CAUTION! Installation should be performed by qualified service installers only, using
!
construction methods in accordance with applicable local codes and standards.
3.1
Power
Model
UMS
3.2
Mounting
The UMS Series has both 2.95-in. (75-mm) and 3.94-in. (100-mm) mounting hole patterns. The
holes are threaded for #10-24 screws with a maximum length of 3/8 in. (not provided with the
UMS Series). In addition, the UMS Series features two mounting holes in which you can attach
a sign to the UMS Series housing. The following illustration details the mounting hole patterns
on the back of the UMS monitor:
8.97
Fig. 3.1 UMS Series Mounting Hole Pattern
Bosch Security Systems, Inc.
Rated Voltage
24 VAC, 60 Hz
8.94
6.96
8.13
3
4
8.28
Installation Manual
Voltage Range
Power at Rated Voltage Sync. Format
22-26 VAC
80 W/100 VA
17.88
3.94
TYP
1.97
2.95
TYP
1.48
2
1
Installing the UMS Series | en
NTSC
3
4
F01U029703 | 1.0 | 2006.07
3
Advertisement
Table of Contents
