Listening To The Radio - Denon AVR-550SD Operating Instructions Manual

ENGLISH
15

LISTENING TO THE RADIO

Auto tuning
2 3
1
1
3
2
1
Set the input source to "TUNER".
FUNCTION / SELECT
(Main unit) (Remote control unit)
NOTE:
• When in the auto tuning mode on the FM band, the "STEREO" indicator lights on the display when a stereo
broadcast is tuned in. At open frequencies, the noise is muted and the "TUNED" and "STEREO" indicators
turn off.
Manual tuning
1
Set the input function to "TUNER".
FUNCTION / SELECT
(Main unit) (Remote control unit)
32
2
Watching the display, press the BAND button
to select the desired band (AM or FM) and to
set the auto tuning mode.
BAND
(Main unit) (Remote control unit)
A1 FM 87.50M
Display
Lit
3
Press the TUNING + or – button.
TUNING
(Main unit) (Remote control unit)
• Automatic searching begins, then stops
when a station is tuned in.
2
Watching the display, press the BAND button
to select the desired band (AM or FM).
BAND
(Main unit) (Remote control unit)
3
Press the BAND button to set the manual
tuning mode.
Check that the display's "AUTO" indicator
turns off.
BAND
(Main unit) (Remote control unit)
NOTE:
• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the "STEREO"
indicator turns off.
Preset stations
3
1,4 2
4
Press the TUNING + or – button to tune in the
desired station.
The frequency changes continuously when the
button is held in.
TUNING
(Main unit) (Remote control unit)
Preparations:
Use the "Auto tuning" or "Manual tuning" operation
to tune in the station to be preset in the memory.
1
Press the MEMORY button.
(Remote control unit)
2
Press the SHIFT button and
select the desired memory
block (A to E).
(Remote control unit)
NOTE:
• Please make sure the "AUDIO" position of
the slide switch on the remote control unit.
3
Press the CHANNEL + or –
button to select the desired
preset channel (1 to 8).
(Remote control unit)
4
Press the MEMORY button
again to store the station in
the preset memory.
(Remote control unit)
To preset other channels, repeat steps 1 to 4.
A total of 40 broadcast stations can be preset – 8
stations (channels 1 to 8) in each of blocks A to E.