Dive Alarm Settings [Dive - Suunto D3 Instruction Manual

4.5. DIVE ALARM SETTINGS
[DIVE AL]
You can set one depth alarm in the D3. When the
depth alarm activates, the
long as the present depth value exceeds the
adjusted value and the alarm sounds for 24
seconds. Press any button to stop the audible
alarm, after it has activated.
To set the depth alarm:
1. In the Setting Mode [SET], press S five (5)
times to select the Dive Alarm Setting Mode (Fig.
4.13.).
2. Wait two seconds until the Dive Alarm Setting
Mode activates automatically. The alarm status
[On/OFF] starts to blink on the display (Fig.
4.14.).
3. Press S to change the selection in the
following sequence.
->On/OFF status -> depth alarm limit -> dive
time alarm minutes (-> dive time alarm seconds)
4. While the alarm status [On/OFF] is selected
(blinking), press + or - to change the status. When
SuuntoD3.p65 45
-symbol blinks as
Fig. 4.13. Dive Alarm Setting
Mode.
Fig. 4.14. Dive Time Alarm.
Center window displays less
than 5 minutes dive time.
31.1.2002, 14:17
45