Suunto D3 Instruction Manual page 56

It is also possible to manually add comments and
other personal information to the PC based dive
data files. The SUUNTO PC-Interface package
comes complete with the interface unit, the
software on CD-ROM, and an instruction manual.
To enter the Data Transfer Mode:
1. In the Memory Mode [MEM], press S three
Fig. 5.11. Data Transfer and PC-
(3) times to select the Data Transfer Mode The
Interface.
TR-PC text appears at the bottom of the display
to indicate the selected mode (Fig. 5.11.).
2. Wait two seconds until the Data Transfer Mode
activates automatically.
NOTE: While in the Data Transfer Mode, the
water contact is used only for the data transfer,
and when connecting the contact by submerging
it, the Dive Mode IS NOT automatically
activated. Data transfer stops also the stopwatch.
After you have finished the data transfer, Press
the M to exit Data Transfer Mode [TR-PC] and
enter the Memory Mode [MEM]. If no button
is operated or no data is transferred within
5 minutes, the D3 beeps and returns to the time-
keeping display automatically.
56
SuuntoD3.p65 56 31.1.2002, 14:17