Logbook And Dive Profile Memory [Log] - Suunto D3 Instruction Manual

5.1. LOGBOOK AND DIVE PROFILE
MEMORY [LOG]
This instrument has a sophisticated high capacity
Logbook and Profile Memory. The data is recorded
to the profile memory based on the sampling rate.
The sampling rate in Gauge mode is adjustable to
10, 20, 30 and 60 s, and in Free mode 1 s. Dives
shorter than the recording interval are not
registered.
To enter the Logbook Memory Mode:
1. In the Memory Mode [MEM], press S to select
the Logbook Memory Mode (Fig. 5.2.). The LOG
text appears at the bottom of the display to
indicate the selected mode.
2. Wait two seconds until the Logbook Memory
Mode activates automatically. For each dive there
are four pages of logbook dive information.
3. Press S to switch the display between
Logbook display I, II, III and IV.
The data of the most recent dive is shown first.
The END text is displayed after the oldest and
most recent dive. (Fig. 5.7.)
SuuntoD3.p65 49
Fig. 5.2. Logbook Memory
Mode.
Fig. 5.3. Logbook, Page I.
49
31.1.2002, 14:17