3.2.5. SURFACE INTERVAL AFTER A
FREEDIVE
An ascent to any depth shallower than 1.2 m [4
ft] will cause the DIVING display to be replaced
by the SURFACE display, giving the following
information (Fig. 3.14.):
•
the surface time in minutes and seconds
(separated by a colon), telling the
duration of the present surface interval.
After one hour the surface time is
displayed in hours and minutes.
•
the time of the most recent dive in
minutes and seconds
•
maximum depth of most recent dive in
meters [ft]
NOTE: Dive numbering in the Free Mode is
different than in the Gauge Mode. It is based on
free dives made during one day. The dive number
is zeroed at midnight.
SuuntoD3.p65
27
Fig. 3.14. Surface display after
Freedive. Center window show-
ing surface time.
27
31.1.2002, 14:17