Stopwatch [Timer - Suunto D3 Instruction Manual

you enter the timekeeping display, the D3 will show
the selected option. The TIMER text blinks on the
display if the stopwatch is running.
The display is illuminated by holding down the M
button for more than two seconds.
To set the time and date, refer to chapter 4.1
"Setting Time, Date and Dual Time".
When diving, the dive entry time and date is
registered in the Logbook Memory. Remember
always to check before diving that the time and
date are correctly set, especially when traveling
to different time zones.
2.4.2. STOPWATCH [TIMER UP]
The Stopwatch function is entered by pressing the
S button, when the time keeping display is shown.
The text TIMEr UP at the bottom and the mode
indicator (TIME) on the left side of the display
indicate that you have entered the Stopwatch
[TIMEr UP] function (Fig.2.6.).
The stopwatch of the D3 lets you measure elapsed
time, split times and the times of two runners.
The range of the stopwatch is 9 hours, 59 minutes,
59.9 seconds (Fig. 2.7.). When the range is
SuuntoD3.p65 15
Fig. 2.6. The Stopwatch function
is indicated by the TIMEr UP
text and a mode indicator.
Fig. 2.7. The Stopwatch displays
hours, minutes and seconds.
15
31.1.2002, 14:16