Table of Contents
Advertisement
m
NO
bar
DIVE
Fig. 3.28. Surface display. You
have surfaced from a 18 minute
dive, which maximum depth
was 20.0 m [66 ft]. The present
depth is 0.0 m [0 ft]. Airplane
symbol indicates that you
should not fly and diver
attention symbol indicates that
you should prolong your surface
interval time because of excess
micro-bubbles.
m
SURF
NO
TIME
°
C
Fig 3.29. Surface interval, Surface
time display. Pressing TIME
button once will show surface time
display.
32
3.6. AT THE SURFACE
3.6.1. SURFACE INTERVAL
MAX
An ascent to any depth shallower than 1.2 m [4 ft] will
cause the DIVING display to be replaced by the
SURFACE display, giving the following information
TIME
(Fig. 3.28.):
•
•
•
•
•
•
•
•
•
MAX
•
TIME
Or when the TIME button is pressed once or twice:
•
•
•
•
maximum depth of last dive in meters [ft]
present depth in meters [ft]
no-flying warning indicated by an airplane
icon
Altitude Adjustment setting
Personal Adjustment setting
Diver attention symbol indicates if you
should prolong your surface interval time
STOP label for 5 min, if the Mandatory
Safety Stop was violated
Er, if the decompression ceiling was violated
(= Error Mode) (Fig. 3.31.)
Cylinder pressure in bars [psi]
dive time of last dive in minutes, shown as
DIVE TIME.
the current time, shown as TIME instead of
the DIVE TIME
the current temperature with °C for
Centigrade [or °F for Fahrenheit]
the surface time in hours and minutes
(separated by a colon), telling the duration
of the present surface interval (Fig. 3.29.)
the desaturation/no-flying time in hours and
minutes is shown next to the airplane in the
center window of the display (Fig. 3.30.).
Advertisement
Table of Contents
