Touch Functions - Pfaff creative 3.0 Owner's Manual

Touch functions

Move Wheel
You can use your stylus to make adjustments
directly on screen, by touching and dragging in the
depending on which touch function is active. You
Move
When move is active, you can move the design(s)
above the wheel show in millimeters how far the
design has been moved from the center of the hoop,
Original size
both horizontally and vertically.
Scale
Touch the wheel center icon and the design(s) will
be moved to the center of the hoop.
Scale
When scale is active, you can increase or decrease
the size of the design without changing the total
number of stitches. By default, the proportions are
Padlock
locked. This is shown with the closed padlock in the
wheel center icon. To unlock, just touch the padlock. Scale
Height and width can now be changed individually.
If you move the stylus on the screen towards
the center of the selected design(s), the size will
decrease. If you move the stylus from the center of
the selected design(s), the size will increase. Use the
new width and height of the design. Touch Original
size icon to reset the design to its original size.
Padlock
Rotate
Rotate
When rotate is active, the selected design(s) will
be rotated around the center point of the selected
design(s).
Use the arrows in the wheel to rotate the design(s)
in one degree steps. Each touch of the wheel center
icon will rotate the design(s) 90 degrees clockwise.
Above the wheel you can see how many degrees the
design(s) has rotated from its original position.
Wheel center
8:4