Channel Level Setting Screen
A
C
D
E
Setting the Channel Balance
This item allows you to adjust the output level
of each type of speaker using the built-in test
signal.The output level must be adjusted from
the listening position.The factory setup is "0
dB" for all types of speakers.
C
Test Signal
This item allows you to output the built-in test
signal from the speakers. Use the test signal
for setting the balance between channels.
Each time you touch [ Noise ] to switch the test
signal function on and off.
A
Adjusting the Front Left Speaker
Each time you touch [
front left output level.
B
Adjusting the Front Right Speaker
Each time you touch [
front right output level.
D
Adjusting the Rear Left Speaker
Each time you touch [
left output level.
NOTE
You cannot operate when the "Multi channel" is
set to "3/0" or "2/0" ( see P 47 ) <When playing
with multi-channels>.
F
Adjusting the Rear Right Speaker
Each time you touch [
right output level.
NOTE
You cannot operate when the "Multi channel" is
set to "3/0" or "2/0" ( see P 47 ) <When playing
with multi-channels>.
E
Adjusting the Center Speaker
Each time you touch [
center output level.
NOTE
B
F
G
] or [
] to adjust the
] or [
] to adjust the
] or [
] to adjust the rear
] or [
] to adjust the rear
] or [
] to adjust the
•You cannot operate when the "Center SP" is
set to "OFF" ( see P 47 ) <When playing with
multi-channels>.
•You cannot operate when the "Multi channel" is
set to "2/2" or "2/0" ( see P 47 ).
G
Returning to the Sound Effect Menu
Screen
Touch [ RTN ] to return to the sound effect menu
screen.
49