Fm/Am Tuner Control Function; Selecting The Fm Bands; Selecting The Am Band; Selecting The Seek Mode - Kenwood Excelon KVT-911DVD Instruction Manual

FM/AM Tuner Control Function

B C
A
H
I
E

Selecting the FM Bands

Touch [ FM ] to select the FM band.
Each time you touch [ FM ] , the band switches
between the FM1, FM2 and FM3.
C

Selecting the AM Band

Touch [ AM ] to select the AM band.
F

Selecting the Seek Mode

You can choose from three seek modes: auto
seek, preset station seek, and manual seek.
Each time you touch [ SEEK ], the mode switches
as follows:
▼
AUTO 1: Auto Seek Mode
▼
AUTO 2: Preset Station Seek Mode
▼
MANU: Manual Seek Mode
D

Tuning

Auto Seek Mode (AUTO1)
• Touch [ ¢ ] to seek increasing frequencies.
• Touch [ 4 ] to seek decreasing frequencies.
Preset Station Seek Mode (AUTO2)
• Touch [ ¢ ] to move to the next preset station.
• Touch [ 4 ] to move to the last preset station .
Manual Seek Mode (MANU)
• Touch [ ¢ ] to increase the frequency by one
step.
• Touch [ 4 ] to decrease the frequency by one
step.
NOTE
The ST indicator is displayed when stereo
broadcasts are being received.
28
FM/AM Tuner Control Screen
D E F
L
J K
Preset Band
G
Preset number
AUTO 1/AUTO 2 /MANU indicator
J

Station Preset Memory

Store the frequency of the station currently
being listened to. You can then recall that
station with a single touch of a button.
1
Select the band/station that you want to have
stored.
2
Hold down preset station number [ 1 ] - [ 6 ]
that you want to use for the station, for two
seconds or more.
NOTE
You can store 6 stations in each of the FM1,
FM2, FM3, and AM band.
A

Auto Memory Entry

You can automatically store all the receivable
frequencies in the band currently being
listened to, and then recall them with the
touch of a button later. This function is
especially useful when you are travelling and
do not know what stations are available. Up to
6 frequencies can be stored this way.
1
Select the band for auto memory entry.
2
Touch [ AME ].
3
Touch [ 4 ] or [ ¢ ] to start auto memory
entry.
The preset station numbers [ 1 ] - [ 6 ] are
shown in order.
When all the stations in a certain band are
stored in the preset memory, the auto memory
entry stops. The tuner then plays the last
station received.
J

Recalling a Preset Station

Touch the preset station number [ 1 ] - [ 6 ] for the
desired station. The number of the recalled station
is displayed.
G

Switching to the PTY Search Screen

Touch [ PTY ] to switch the PTY search screen.
(Page 31)
NOTE
This function can't be used during a traffic
bulletin or AM reception.
Radio-Text/Program Service name/SNPS
Frequency
TI indicator
CRSC indicator
ST indicator