Turning Ti Function On/Off - Kenwood Excelon KVT-911DVD Instruction Manual

FM/AM Tuner Control Function
V
O
L
V.SEL
ATT
A
B

Turning TI function On/Off

You can listen to traffic information. If you are
listening to discs, they will continue playing
until a traffic bulletin is broadcast.
Press the [ TI ] button to turn the function on and
off.
When the function is on, the TI indicator is
displayed.
When a traffic bulletin begins to be broadcast,
"Traffic Information" will be displayed.
If you are listening to a tape or disc when a traffic
bulletin begins, they will automatically be turned
off. When the bulletin ends or poor reception is
experienced, the tape or disc will begin playing
again.
C
Seeking to a Different Traffic
Information Station
Use the [ 4 ] / [ ¢ ] to make an auto seek of the TI
stations in a certain band.
NOTE
When you are listening to a disc, you cannot
change to another TI station.
A
Presetting the Volume for Traffic
Information
B
Preset the volume level to be used for traffic
information and news broadcasts.
1
Tune into the station for which you want to
set the volume.
2
Adjust the volume to the desired level.
3
Hold down the TI button for two seconds or
more.
Future traffic information/news broadcasts
are heard at the preset level.
NOTE
• The volume cannot be lowered by this
function during tuner reception. The volume is
only set when it is louder than the listening
volume of the tuner.
• You can arrange only to listen to traffic
information or news bulletins with at preset
volume with the volume set at minimum.
30
DISC/BAND
SCREEN
EJECT
SOURCE TI
B
C
V
O
L