1. Manuals
  2. Brands
  3. Kenwood Manuals
  4. Car Receiver
  5. KVT-827DVD
  6. Instruction manual

Kenwood KVT-827DVD Instruction Manual

Monitor with dvd receiver
Hide thumbs Also See for KVT-827DVD:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Installation Manual
MONITOR WITH DVD RECEIVER
KVT-827DVD

INSTRUCTION MANUAL

© B64-3174-00/00 (EV/E2V)

Advertisement

Table of Contents
loading

Related Manuals for Kenwood KVT-827DVD

Summary of Contents for Kenwood KVT-827DVD

  • Page 1: Instruction Manual

    MONITOR WITH DVD RECEIVER KVT-827DVD INSTRUCTION MANUAL © B64-3174-00/00 (EV/E2V)

  • Page 2: Table Of Contents

    Notes on playing MP3/WMA/JPEG/MPEG .. 6 Opening/Closing the Monitor and Power Switch ... 8 Removing/Attaching the Protection Panel .. 9 KVT-827DVD Basic operations ... 10 Basic Operations of Remote Controller ... 12 About discs ... 15 Switching Small Display ... 16 Switching Screen Mode ...
  • Page 3 DVD Setup ...60 Displaying the DVD SETUP 1 screen Displaying the DVD SETUP 2 screen Displaying the DVD SETUP 3 screen Language Setup Parental Level Setup System Setup ...64 Displaying the System 1 screen Displaying the System 2 screen AV Interface ...66 Displaying the AV I/F 1 screen Displaying the AV I/F 2 screen Displaying the AV I/F 3 screen...

  • Page 4: Before Use

    Called lens fogging, discs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a whilst, consult your Kenwood dealer.
  • Page 5 Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. Icons on the DVD discs Icon Indicates the region code where the disc can be played. Number of voice languages recorded with the audio function.

  • Page 6: Notes On Playing Mp3/Wma/Jpeg/Mpeg

    Notes on playing MP3/WMA/JPEG/MPEG This unit can play MP3 (MPEG1 Audio Layer 3)/ WMA/JPEG/MPEG (MPEG 1/MPEG 2). Note, however, that the MP3/WMA/JPEG/MPEG recording media and formats acceptable are limited. When writing MP3/WMA/JPEG/MPEG, pay attention to the following restrictions. Acceptable media The MP3/WMA/JPEG/MPEG recording media acceptable to this unit are CD-ROM, CD-R, CD-RW,DVD-R/RW and DVD+R/ When using CD-RW, do full format not quick format to prevent...
  • Page 7 MP3/WMA/JPEG/MPEG playing order When selected for play, Folder Search, File Search, or for Folder Select, files and folders are accessed in the order in which they were written by the CD/DVD writer. Because of this, the order in which they are expected to be played may not match the order in which they are actually played.

  • Page 8: Opening/Closing The Monitor And Power Switch

    Opening/Closing the Monitor and Power Switch Open the monitor Close the monitor Turn the power on Hold down the [SRC] key more than one second to turn it off. Do not touch the moving components when you are opening or closing the monitor. If you touch the moving components, •...

  • Page 9: Removing/Attaching The Protection Panel

    Removing/Attaching the Protection Panel Remove the protection panel Attach the protection panel Place the right end of the protection panel onto hooks and push it until clicked and locked. Then, push the left end of the panel to lock it. Close the monitor first, then remove or attach the protection panel.

  • Page 10: Kvt-827Dvd Basic Operations

    KVT-827DVD Basic operations ■ When the monitor is open OPEN/CLOSE ■ When the monitor is closed OPEN/CLOSE 1 Play Disc [Disc insertion slot] A disc is played when you insert it. 2 Stop to Play [7] key Stops to play.

  • Page 11: Volume Controls

    DVD/VCD TV */ Video R-CAM * Navigation * * Optional accessory You can also turn off the video display by pressing the key longer than 1 second. When you press the key again, the previous video display comes back on. 7 Audio Source Selection/Power Supply [SRC] key Audio source selection changes in the...

  • Page 12: Basic Operations Of Remote Controller

    Basic Operations of Remote Controller ENTER MENU RETURN – BAND ZOOM ZOOM POSITION MODE ROUTEM VIEW MENU TOP MENU MAPDIR VOICE 2-ZONE AV OUT REAR 1 Remote Control Mode selector switch Selects one of the following remote control modes when switched to AV control mode with [NAV] switch. TV source DVD: Built-in DVD/VCD/CD/MP3/WMA/JPEG/MPEG player source...
  • Page 13 6 [BAND] key (When 1 is set to "DVD" or "AUD") DISC Select a disc and a folder. (When 1 is set to "TV" or "AUD") BAND: Switches to TV1, TV2, VIDEO1, or VIDEO2. (When 1 is set to "AUD") TUNER +: Switches to the FM1, FM2, or FM3 band.
  • Page 14 o [0] – [9] key (When 1 is set to "TV") (When 1 is set to "AUD") TUNER — : Recall the stations on memory. 1 . ? & 6 MNO You can enter a character/number. [SUBTITLE] key (When 1 is set to "DVD") : Switches a subtitle language.

  • Page 15: About Discs

    About discs Handling discs • Do not touch the recording surface of the disc. • CD-R/RW, DVD-R/RW, and DVD+R/RW are easier to damage than a normal music CD. Use a CD-R/RW, DVD-R/RW, or DVD+R/RW after reading the caution items on the package etc.

  • Page 16: Switching Small Display

    Switching Small Display The Small Display screen mode changes each time the [DISP] key is pressed. OPEN/CLOSE DISP [DISP] key * Hold down the [DISP] key more than 1 second to switch to the Frequency display. English Navigation "NAV" "AUX EXT" Band &...

  • Page 17: Switching Screen Mode

    Switching Screen Mode The Screen mode of the monitor changes each time the [MODE] key is pressed. OPEN/CLOSE DISP Full picture mode (FULL) Justify picture mode (JUST) Cinema picture mode (CINEMA) Zoom picture mode (ZOOM) Normal picture mode (NORMAL) • When you select the Menu, Easy Control screen, or Navigation, the display is shown in the full-size display mode automatically. The screen mode of these displays cannot be changed.

  • Page 18: Jpeg Or Mpeg Playback

    Displays the Zoom Control buttons (page 23). w Information Display Button Area (page 23) • For DVD/VCD playback, DVD/VCD picture selection, or controller key operations, see <KVT-827DVD Basic Operations> (page 10). • The information display is cleared automatically after approximately 5 seconds. Also, the information can be...

  • Page 19: Displaying The Easy Control Panel

    JPEG/MPEG playback screen DVD MEDIA Mode: FULL AVOUT: Displaying the Easy Control Panel The Control Panel is displayed in a floating position of the DVD/VCD screen. Displaying the Easy Control Panel DVD VIDEO Title Chap e Folder/File Number Display P 0:01:48 r Forword File Search Area Selects the next folder or file.

  • Page 20: Displaying The Dvd/Vcd Control Screen

    DVD VIDEO DVD VIDEO Title 1 Chap T 0:05:20 KENWOOD English g Adjusts the volume. h Ejects the disc from the built-in disc player. j Calls the Sound Effects Menu. (page 82) k Displays the Source Select screen. (page 51) l Calls the Setup Menu.
  • Page 21 Controling during DVD Video, Video CD, JPEG or MPEG Playback English...

  • Page 22: Dvd Disc Menu

    You can select a chapter and title for the DVD Menu screen. When you touch a chapter and title, it is played back. Highlight [ Highlight On ] DVD Menu DVD Menu 1. KENWOOD 1. KENWOOD 2. KENWOOD 2. KENWOOD 3. KENWOOD 3. KENWOOD 4. KENWOOD 4.

  • Page 23: Vcd Zoom Control

    VCD Zoom Control Displays an enlarged VCD screen. Display the Zoom Control screen Zoom Control Button Area (page 18) Zoom Control Zoom 1 Changes the zoom ratio at 4 levels (2 times, 3 times, 4 times, or off ) each time you touch. 2 Scrolls the screen in the direction you touch.

  • Page 24: Control

    8 Selects a disc. (only when a disc is played back on the disc changer) • For CD/MP3/WMA/JPEG/MPEG/Disc Changer playback P 11:10 and receiver key operations, see <KVT-827DVD Basic Operations> (page 10). • The Easy Control Panel is hidden when you touch a central area of the monitor.

  • Page 25: Changer Control Screen

    Displaying the CD/MP3/WMA/JPEG/ MPEG/Disc Changer Control screen You can play the CD/MP3/WMA/JPEG/MPEG/Disc changer using various functions. CD Control screen MENU Direct DVD CD DISP SCRL Track 4 P 2:09 During CD playback 9 Adjusts the volume. p Calls the CD Menu. q Calls the Sound Effects Menu.
  • Page 26 MP3/WMA/JPEG/MPEG Control screen MENU Direct DVD MEDIA DVD MEDIA Folder Folder Next DISP P 00:03:24 FREP English During MP3/WMA/JPEG/MPEG play / Ejects a disc. z Fast Forwards or Fast Backwards.. (Disabled when a JPEG is being played.) x Stops to play. When pressed twice, the disc is played back from SCRL its beginning in the next time.

  • Page 27: Set Disc Name

    Disc Changer Control screen MENU Disc Direct CD-CH Disc Next DISP SCRL P 01:24 DREP MRDM CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control During play by the disc changer I Selects a track. Starts Fast Forward or Fast Backwards when it is held down. O Selects a disc.

  • Page 28: Changer Menu Screen

    Displaying the CD/MP3/WMA/JPEG/ MPEG/Disc Changer Menu screen You can select menu options using various functions. MENU CD Menu screen Name Set English Selects options from various function menus. Returns to the CD/MP3/WMA/JPEG/MPEG/Disc Changer Control screen. • The available functions vary depending on the source used. MENU MENU...

  • Page 29: Set Disc Name

    Set Disc Name Names a CD. Play a CD you wish to name Call the CD/Disc Changer Menu MENU Select the Set Name mode Name Set • The position varies depending on the disc Name Set you are playing. Enter a name For character entry details, see <Character Entry>...

  • Page 30: Id3/Wma Tag Display (During Mp3/Wma Play)

    WMA play) The ID3/WMA TAG information of MP3/WMA file is listed. Call the MP3/WMA/JPEG/MPEG Menu MENU Display the ID3/WMA TAG Infomation MENU Title: KENWOOD Artist: KENWOOD Album: KENWOOD 1 Scrolls the list. English Disc Select (during play by disc changer) The discs loaded on the disc changer are listed for quick disc selection.

  • Page 31: Direct Search

    Direct Search Searches for a disc or a track when its number is entered. During play on the built-in disc player Select the Direct Search mode # BS DIRECT The following items can be searched directly each time it is pressed. CD: Track number, Total play time MP3/WMA/JPEG/MPEG: Folder, File Enter a track number...

  • Page 32: Tuner Control

    4 Tunes in a station 5 Switches the Seek mode. (see page 34 for the <Seek Mode>) • For receiver key operations, see <KVT-827DVD Basic Operations> (page 10). • The Easy Control Panel is hidden when you touch a central area of the monitor.

  • Page 33: Displaying The Tuner Menu Screen

    Displaying the Tuner Menu screen You can select menu options using various functions. MENU Tuner Menu screen MENU MENU Preset Select PTY Search Radio Text ; Turns the Local seek function On or Off. a When buttons appear, you can recall the stations on memory.

  • Page 34: Seek Mode

    Seek Mode Sets a station selection. SEEK is not shown, touch SEEK Next The mode is switched in following order each time you touch the button. Tunes in a station with good AUTO 1 reception automatically. Tunes in stations in memory one after AUTO 2 another.

  • Page 35: Preset Select

    Preset Select Lists and tunes in stations in memory one after the other. Call the Tuner Menu MENU Call the Preset Select Menu Preset Select P1 87.9 MHz MENU P2 90.1 MHz P3 98.1 MHz P4 87.9 MHz TUNER P5 87.9 MHz P6 87.9 MHz FM 1 Preset 3...

  • Page 36: Direct Search

    Direct Search Tunes in a station when its frequency is entered. Select a band – BAND Selects the Direct Search mode # BS DIRECT Enter a frequency — 9 WXYZ When you enter frequency, signal reception starts. Example: When you receive FM 92.1 MHz 9 WXYZ 2 ABC 1 .

  • Page 37: Search For Program Type

    Search for Program Type A program is tuned when you set its program type. (Only when receiving the FM broadcast.) Call the Tuner Menu MENU Call the PTY Search Menu PTY Search MENU News Current Affairs Information TUNER Sport Education FM 1 Preset 3 98.1 MHz...

  • Page 38: Tv/ Video Control

    Switches to TV1, TV2, VIDEO1 or VIDEO2. 8 Information Display Button Area • For TV picture selection and receiver key operations, see <KVT-827DVD Basic Operations> (page 10). • The information display is cleared automatically after approximately 5 seconds. Also, the information can be displayed automatically when it is updated (page 68).

  • Page 39: Displaying The Tv Control Screen

    Displaying the TV Control screen You can tune in a TV station using various functions. TV Control screen MENU VIDEO Direct Next SEEK 2 ch Group 1 Preset 3 AUTO1 t Adjusts the volume. y Calls the TV Menu. u Calls the Sound Effects Menu. (page 82) i Displays the Source Select screen.

  • Page 40: Displaying The Tv Menu Screen

    Displaying the TV Menu screen You can select menu options using various functions. MENU TV Menu screen Preset Select Name Set English z Selects option from various function menus. x Returns to the TV Control screen. MENU MENU...

  • Page 41: Seek Mode

    Before Use Seek Mode Sets a TV station selection. SEEK is not shown, touch SEEK Next The mode is switched in following order each time you touch the button. Tunes in a station with good AUTO 1 reception automatically. Tunes in stations in memory one after AUTO 2 another.

  • Page 42: Manual Memory

    Before Use Manual Memory Stores the current receiving channel in memory. Select a channel you wish to store in memory Store in memory 2sec. 2sec. — are not shown, continue to touch button until the memory number appears. Next English Preset Select Lists and tunes in stations in memory one after the other.

  • Page 43: Set Station Name

    Set Station Name Names a station. Select a station you wish to name Call the TV Menu (Page 39 y) MENU Select the Set Name mode Name Set Enter a name For character entry details, see <Character Entry> (page 50). Exit the Set Name mode •...

  • Page 44: Dab Tuner Control

    5 Selects the Ensemble. 6 Switches the Seek mode. (see page 46 for the <Seek Mode>) • For system key operations, see <KVT-827DVD Basic Operations> (page 10). • The Easy Control Panel is hidden when you touch a central area of the monitor.

  • Page 45: Displaying The Dab Tuner Menu Screen

    Displaying the DAB Tuner Menu screen You can select menu options using various functions. MENU DAB Tuner Menu screen Service Select Language Filter PTY Search DAB Information ; When a service on memory. a Indicates current Seek mode. s Clock Display When touched, the display of Clock 1, Clock 2, and Clock 3 are switched one after the other.

  • Page 46: Seek Mode

    Seek Mode A service selection method can be set. SEEK is not shown, touch SEEK Next The mode is switched in following order each time you touch the button. Tunes in a ensemble with good AUTO 1 reception automatically. Tunes in service in memory one after AUTO 2 another.

  • Page 47: Service Select

    Service Select The service list of the currently receiving ensemble is displayed for your selection. Call the DAB Tuner Menu MENU Call the Service Select Menu Service Select MENU Service Name Service Name Service Name Service Name Service Name 1 Selects a service. 2 Scrolls the service list.

  • Page 48: Search For Program Type

    Search for Program Type The services are received when you set its program type. Call the DAB Tuner Menu MENU Call the PTY Search Menu PTY Search MENU News 1 Selects a program type. 2 Searches for the program type. 3 Displays the Language select screen.

  • Page 49: Dab Information

    DAB Information The DAB information is displayed. Call the DAB Tuner Menu MENU Display the DAB Information screen DAB Information MENU AUDIO QUALITY: 1234567890123456 REGION LABEL: 1234567890123456 1 Displays the DAB information (such as Service label, Ensemble label, Component label, Audio quality, Region label, and Dynamic label).

  • Page 50: Character Entry

    Character Entry How To Use the Character Entry screen When you select the Set Disc Name mode or others, the following screen appears for character entry. Character Entry screen English 1 Shifts the cursor. 2 Enters a space. If you erase a character, locate the cursor on it and touch this button.

  • Page 51: Source Select

    Control screen MENU MENU Direct DVD VIDEO DVD VIDEO Title 1 Chap T 0:05:20 KENWOOD Displaying the Source Select screen Direct Source Select screen STANDBY TUNER VIDEO CD-CH Next • The Source Select screen can be displayed from the control...

  • Page 52: Adjusting The Monitor Display Position And Quality

    Adjusting the Monitor Display Position and Quality You can adjust the position and picture quality of the monitor. Displaying the Screen Control screen You can adjust the picture quality using the following keys. Screen Control screen Screen Control CONT BLACK Auto DIM Displaying the Angle Control screen You can set the monitor position and open/close...

  • Page 53: Setup Menu

    Control screen MENU MENU Direct DVD VIDEO DVD VIDEO Title 1 Chap T 0:05:20 KENWOOD Displaying the Setup Menu screen Setup Menu screen Prev. Touch Clock Security TV Set Up Next • You can call the same Setup Menu for the Control screen of each source.

  • Page 54: Audio Set Up

    Control during DVD Video, DVD Audio or Video CD Playback Audio Set Up (Other than STANDBY mode) You can set up the car type and speaker system you use together with this unit. Displaying the Car Type Set Up screen If your car type is selected, the Digital Time Alignment and Equalizer is set automatically (for timing adjustment of sound output for each...

  • Page 55: Displaying The Channel Level Screen

    Before Use Displaying the Channel Level screen You can set the volume at each setup position. Channel Level screen MENU Channel Level Channel Level Channel Level r Selects a speaker to be set. (see <Channel Level>, page 57) t Sets the speaker volume. (see <Channel Level>, page 57) y Starts or stops test signal tone output for setup check.

  • Page 56: Speaker Set Up

    Speaker Set Up You can select a speaker type and its size to get the best sound effects. Select a speaker you wish to adjust (Page 54 8) Speaker Set Up screen MENU Tweeter Speaker Speaker Speaker 1 Center speaker 2 Front speaker 3 Rear speaker 4 Subwoofer...

  • Page 57: Channel Level

    Before Use Channel Level You can set the volume at each setup position. Select a speaker you wish to adjust (Page 55 r) Channel Level setup screen MENU Channel Level Channel Level Channel Level 1 Center speaker 2 Left front speaker 3 Right front speaker 4 Left rear speaker 5 Right rear speaker...

  • Page 58: Dta Setup

    Before Use DTA Setup Manually sets the sound output timing of each channel. Display the DTA Setup screen (Page 54 6) DTA Setup screen 1 Selects a speaker to be adjusted. 2 Sets a delay time of the selected speaker. 3 Returns to the Car Type Set Up screen.

  • Page 59: Crossover Network Setup

    Before Use Crossover Network Setup You can manually set a crossover frequency of speakers. (Page 54 p) X'Over X'Over Subwoofer 100Hz Frequency 80 Hz Slope 12dB/Oct 1 Sets a crossover frequency. 2 Sets a crossover slope. 3 Returns to the Speaker Set Up screen. 4 Sets the phase of subwoofer output (it is displayed when the subwoofer crossover frequency is set).

  • Page 60: Dvd Setup

    Before Use DVD Setup You can set up the DVD play. Displaying the DVD SETUP 1 screen DVD SETUP DVD SETUP 1 screen MENU Menu Language Subtitle Language Audio Language Original Dynamic Range Control Normal DVD SETUP 1 DVD SETUP 1 DVD SETUP 1 English 1 Adjusts the volume.

  • Page 61: Displaying The Dvd Setup 3 Screen

    Before Use Displaying the DVD SETUP 2 screen DVD SETUP 2 screen MENU Parental Level Angle Mark Screen Ratio 4:3 LB DVD SETUP 2 DVD SETUP 2 DVD SETUP 2 Displaying the DVD SETUP 3 screen DVD SETUP 3 screen Picture Display Time MENU Middle...

  • Page 62: Language Setup

    Language Setup Selects a language you use for the speech and menus. Display the Language Setup screen See <Displaying the DVD SETUP 1 screen> (page 60) and select a language you wish to use. Audio Language Set 1 Enters a language code. 2 Cancels the language setup and returns to the DVD SETUP 1 screen.

  • Page 63: Parental Level Setup

    Before Use Parental Level Setup Sets a parental level. Display the Parental Level code number screen (Page 61 p) Parental Pass Clear 1 Enters a code number. 2 Cancels the current setup and returns to the DVD SETUP 2 screen. 3 Clears the code number.

  • Page 64: System Setup

    System Setup You can set up the system parameters. Displaying the System 1 screen System Set Up System 1 screen MENU Beep Scroll Manual Remote Sensor System Set UP 1 System Set UP 1 System Set UP 1 English 1 Adjusts the volume. 2 Returns to the Control screen of the previous source.

  • Page 65: Displaying The System 2 Screen

    Displaying the System 2 screen System 2 screen MENU CD Read Key illumination color Green Display illumination color Blue System Set Up 2 System Set Up 2 System Set Up 2 9 Set a music CD playback. ( "1": Automatically recognizes and plays back an MP3/WMA disc, a DVD or a music CD.

  • Page 66: Av Interface

    3 Calls the Sound Effects Menu. (page 82) 4 Calls the Setup Menu. 5 Selects a navigation system connection. ( "RGB": Allows the Kenwood’s Navigation System to connect via its interface cable. "AV-IN1": Allows a third-party navigation system to connect via the AV INPUT1 port.

  • Page 67: Displaying The Av I/F 2 Screen

    Before Use Displaying the AV I/F 2 screen AV I/F 2 screen MENU R-CAM Interruption R-CAM Mirror Normal AV-OUT AV I/F 2 AV I/F 2 AV I/F 2 Displaying the AV I/F 3 screen AV I/F 3 screen MENU Navigation Interruption Right Guide Volume Level Line Mute...

  • Page 68: User Interface

    Control during DVD Video, DVD Audio or Video CD Playback User Interface You can set up user interface (IF) parameters. Displaying the User I/F 1 screen User Interface User I/F 1 screen MENU Background Change Light Background Movie Frame Select Pattern2 Demonstration User I/F 1...

  • Page 69: Displaying The User I/F 3 Screen

    Displaying the User I/F 3 screen User I/F 3 screen MENU Key Information Marker Pattern1 User I/F 3 User I/F 3 User I/F 3 e Sets an on-screen display of the TV screen. Auto) (when the optional accessory TV tuner in connected only) "Auto": Information is displayed for 5 seconds when updated.

  • Page 70: Touch Panel Adjustment

    Touch Panel Adjustment You can adjust the touch panel operations. Display the Touch Panel Adjust screen Touch is not shown, touch Touch to display it. Next MENU Touch Panel Adjust Touch Touch Touch 1 Adjusts the volume. 2 Returns to the Control screen of the previous source.

  • Page 71: Clock

    Clock You can adjust the clock time. Display the Clock screen Clock is not shown, touch Clock to display it. Next MENU 13:50 RDS Synchronize Clock Clock Clock 1 Adjusts the volume. 2 Returns to the Control screen of the previous source.

  • Page 72: Security Code Setup

    Before Use Security Code Setup You can set a security code to protect your receiver system against theft. • When the Security Code function is activated it cannot be released. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport"...
  • Page 73 Before Use If you have pressed the Reset button or if you have disconnected the Receiver from battery... Enter the correct security code — You must enter the same security code as that you have entered in Step 3 above. Enter the security code Enter Now, you can use your Receiver.

  • Page 74: Set Up Memory

    Set Up Memory Audio Set Up and AV Interface settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. Display the Set Up Memory screen Set Up Memory is not shown, touch...
  • Page 75 Setup Menu English...

  • Page 76: Tv Setup

    TV Setup The TV signal receiving areas can be set. (with the optional accessory TV Tuner connected only) Displaying the TV1 Area Set Up screen TV Set Up TV1 Area Set screen MENU TV 1 Area Set Au s t r i a B e l g i u m F i n l a n d G e r m a ny...

  • Page 77: Rds Setup

    RDS Setup The related RDS parameters can be set. Displaying the RDS Set Up1 screen RDS Set Up RDS Set Up1 screen MENU News 10 min Regional Auto Tp Seek RDS Set Up1 RDS Set Up1 RDS Set Up1 Displaying the RDS Set Up2 screen RDS Set Up2 screen MENU Language Select...

  • Page 78: Dab Set Up

    DAB Set Up You can set the DAB reception. (only with the optional accessory DAB Tuner connected) Displaying the DAB Set Up screen DAB Set Up DAB Set Up screen MENU DAB Priority Regional INT PTY Watch PTY Watch Off Announcement Select DAB Set Up DAB Set Up...

  • Page 79: Announcement Selection

    Announcement Selection You can set various announcement reception parameters. Displays the Announcement Selection screen (Page 78 9) Traffic News Transport News Special Event Warning Radio Info News Sports News Weather Financial News 1 Adjusts the volume. 2 Turns the Announcement Reception function On or Off.

  • Page 80: Amp Control

    AMP Control Sets the power amp connected via the LX bus. (with the optional accessory LX Power Amp connected only) Displaying the AMP Control screen AMP Control screen MENU AMP 1 VOLT 14.4V AMP Control AMP Control AMP Control English 1 Adjusts the volume.

  • Page 81: Muting Audio Volume Upon Reception Of Phone Call

    Muting Audio Volume upon Reception of Phone call Muting Audio Volume upon Reception of Phone call When the telephone is called, the system is paused automatically. When the telephone is called... The Phone Call ("CALL") screen appears, and system is paused. Phone Call ("CALL") screen MENU MENU...

  • Page 82: Sound Effects Menu

    You can set up the receiver sound effects. Displaying the Control screen Control screen MENU MENU Direct DVD VIDEO DVD VIDEO Title 1 Chap T 0:05:20 KENWOOD Displaying the Sound Effects Menu screen Sound Effects screen Audio Control Equalizer Surround Control SRS WOW Zone Control Position English •...

  • Page 83: Audio Control

    Before Use Audio Control You can adjust the front and rear and right and left audio balance. Displaying the Audio Control screen Audio Control Audio Control screen Balance / Fader MENU FAD F1 BAL R1 Audio Control Audio Control Audio Control 1 Adjusts the volume.

  • Page 84: Equalizer

    Equalizer You can set up the equalizer. Displaying the Equalizer screen Equalizer Equalizer screen MENU BMS AMP Bass Flat BMS AMP FREQ Normal Top 40 English 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu.

  • Page 85: Parametric Equalizer

    Parametric Equalizer You can manually set the equalizer curve by adjusting the center frequency, gain and Q value. Display the Parametric Equalizer screen P-EQ Parametric Equalizer 80Hz 315Hz 1.6kHz +9dB -7dB +9dB Gain Gain Gain Gain 1.00 0.25 0.50 Band1 Band2 Band3 Band4...

  • Page 86: Surround Control

    Surround Control You can set up the sound field. Displaying the Surround Control screen Surround Control Surround Control screen Stream Information MENU Dolby Digital 2/0 48kHz Dolby PL Music Surround Control Surround Control Surround Control English 1 Adjusts the volume. 2 Returns to the Control screen of the previous source.

  • Page 87: Surround Control Adjustment

    Surround Control Adjustment You can adjust the sound field. Display the Surround Control screen Adjust Surround Control Adjust screen If the sound field of "Dolby PLII Music" has been set: PL Adjust Dimention Control Neutral Center Width Control Panorama Mode 1 Adjusts the volume.

  • Page 88: Srs Wow Control

    SRS WOW Control You can set up the SRS WOW effect. Displaying the SRS WOW Control screen SRS WOW SRS WOW Control screen MENU Middle SRS WOW SRS WOW SRS WOW Table of Sound Effect Menu You can set to sound effect menu to mark " Input Surround Front...

  • Page 89: Srs Wow User Setup

    SRS WOW User Setup Display the SRS WOW Adjust screen Adjust SRS WOW Adjust screen SRS WOW Adjust 1 Adjusts the volume. 2 Selects a speaker to be set (Front, Rear or Center speaker). 3 Sets the TruBass effect level. 4 Sets the FOCUS effect level.

  • Page 90: Position

    Position You can adjust the sound effects according to your listening position. Displaying the Position screen Position Position screen MENU English 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu. (page 53) 4 Calls the Sound Effects Menu.

  • Page 91: Position Fine Control

    Position Fine Control You can fine-adjust your listening position. Display the Position Fine Control screen Adjust Position Fine Control screen Position Fine Control 1 Adjusts the volume. 2 Selects a speaker to be adjusted. 3 Indicates setup distance. The adjusted distance (Position and Position Fine Control values), and the total of the distance adjusted by Car Type Set Up (page 54) and the adjustment distance for position setup...

  • Page 92: Zone Control

    Zone Control You can set the front and rear audio source. Displaying the Zone Control screen Zone Control Zone Control screen MENU Zone Rear Vol. 15 Dual Zone Front Area Reverse English 1 Adjusts the volume. 2 Returns to the Control screen of the previous source.

  • Page 93: Glossary

    Glossary DVD: Digital Versatile Disc A type of disc which contains recording of audio/ video packaged media with high video and audio quality, such as a movie, featuring large recording capacity and digital signal processing capability. VCD: VIDEO CD A type of CD which contains the recording of mov- ing images.

  • Page 94: Troubleshooting Guide

    Troubleshooting Guide Some system functions are limited to control depending on your setup. • Zone cannot be set. • The "Rear Bass Boost" of Surround Control Adjust cannot be set. • The rear speakers of DTA cannot be set. • The "Position Fine Control" of rear speakers cannot be set. •...
  • Page 95 What might appear to be a malfunction in your unit may just be the result of slight misopera- tion or miswiring. Before calling service, first check the following table for possible problems. General The power does not turn on. ✔ The fuse has blown.
  • Page 96 Before Use The sound quality is poor or distorted. ✔ One of the speaker wires is being pinched by a screw in the car. Check the speaker wiring. ✔ The speakers are not wired correctly. Reconnect the speaker wires so that each output terminal is connected to a different speaker.
  • Page 97 Before Use The specified disc does not play, but another one plays instead. ✔ The specified CD is quite dirty. Clean the CD. ✔ The CD is upside-down. Load the CD with the labeled side up. ✔ The disc is loaded in a different slot from that specified.
  • Page 98 Mecha Error The disc player is malfunctioning. ] Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected. Disc Error The unplayable discs is inserted. Read Error The disc is upside-down.

  • Page 99: Specifications

    Specifications Specifications subject to change without notice. Monitor Section Picture size : 6.95 inches (diagonal) wide 154.1(W)×87.1(H)mm Display system : Transparent TN LCD panel Drive system : TFT active matrix system Number of pixels : 336,960 (480H×234V×RGB) Effective pixels : 99.99% Pixel arrangement : RGB striped arrangement Back lighting...
  • Page 100 Video section Color system of external video input : NTSC/PAL External video input level (RCA jacks) : 1Vp-p/75Ω External audio max input level (RCA jacks) : 1V/22kΩ Analog RGB input : 0.7Vp-p/75Ω Audio section Maximum Power (Front&Rear) : 50W×4 Output power (Front&Rear) (DIN 45324, +B=14.4V) : 30W×4 Preout level (V) : 5V/10kΩ...
  • Page 101 The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

Table of Contents