Sms (Short Message Service); Adding A Voice Dialing Command - Kenwood KDC-BT645U Instruction Manual

Function of KDC-BT645U
KDC-HD545U with KCA-BT200 (Optional Accessory)
Bluetooth Setup

SMS (Short Message Service)

The SMS arrived at the cell-phone is displayed on
the receiver.
A newly arrived message is displayed.
¤
• To prevent car accidents, the driver should not read the
SMS while driving.
When a new message arrives
"SMS RECEIVED" is displayed.
The display disappears with any operations.
Displaying the SMS
1
Select SMS Inbox mode
For how to select setup item, refer to <Bluetooth
Setup> (page 22).
>
Select "SETTINGS"
2
Enter SMS Inbox mode
Press the [VOL] knob.
A message list appears.
3
Select a message
Turn the [VOL] knob.
KDC-BT645U: [ ] button
KDC-HD545U: [DISP] button
Each pushing of the button switches between
telephone number or name and message
reception date.
4
Display the text
Press the [VOL] knob.
Turning the [VOL] knob scrolls the message.
Pressing the [VOL] knob again returns to the
message list screen.
5
Exit Function Setting mode
Press the [ ] button for at least 1 second.
⁄
• The unopened message is displayed at the beginning
of the list. Other messages are displayed in the order of
reception.
• The SMS that has arrived when the cell-phone is not
linked with Bluetooth cannot be displayed. Download
the SMS.
• The short message cannot be displayed during
downloading the SMS.
• Unread messages are prefixed with an asterisk (*).
26
|
KDC-BT645U/ KDC-HD545U
>
"SMS INBOX".

Adding a Voice Dialing Command

Add a voice tag to the phone book for voice dialing.
You can register up to 35 voice tags.
1
Select Phone book name edit mode
For how to select setup item, refer to <Bluetooth
Setup> (page 22).
>
Select "SETTINGS" "VOICE TAG".
2
Enter Voice Tag edit mode
Press the [VOL] knob.
3
Enter Phone book name edit mode
Turn the [VOL] knob to select "PB NAME EDIT",
and then press the [VOL] knob.
4
Search for the name to register
Select the name to register with reference to 3 in
<Calling a Number in the Phone Book> (page 14).
If a voice tag has already been registered for a
name, "*" is displayed before the name.
5
Select a mode
Turn the [VOL] knob.
Display Operation
"PB NAME REG" Register a voice tag.
"PB NAME CHK"* Play a voice tag.
"PB NAME DEL"* Delete a voice tag.
"RETURN" Return to step 3.
* Displayed only when a name for which a voice tag has
been registered is selected.
Select "PB NAME REG" (Register)
6
Register a voice tag (first)
Press the [VOL] knob.
"ENTER1" is displayed.
When a beep is heard, say a voice tag within 2
seconds.
7
Confirm the voice tag (second)
Press the [VOL] knob.
"ENTER 2" is displayed.
When a beep is heard, say the same voice tag as
that you said in step 5 within 2 seconds.
"COMPLETE" is displayed.
8
End registration
Press the [VOL] knob.
Return to step 3. You can register another voice tag
continuously.
⁄
• If your voice cannot be recognized, a message is
displayed. Pressing the [VOL] knob allows you to retry
voice input. (page 39)