Imager Scanning - Motorola MC55 User Manual

Linear Scanning
Figure 2-23
Press the scan button. Ensure the red scan beam covers the entire bar code. The Scan/Decode LED lights red
3.
to indicate that scanning is in process, then lights green and a beep sounds, by default, to indicate the bar code
was decoded successfully.
Correct
Linear Scanner Aiming Pattern
Figure 2-24

Imager Scanning

Ensure that a scan-enabled application is loaded on the MC55.
1.
Aim the scan window at the bar code.
2.
SE4400 (MC5574 only)
Imager Scanning
Figure 2-25
Incorrect
SE4400 (MC5574 only)
Using the MC55 2 - 37
SE4500 (MC5590 and MC55A0 only)