Care Information; Installation Instructions - Heatscope MHS-SM1600 Original Installation And Instruction Manual

EN
4. Unpacking the unit / packaging
Unpack the unit and the accessories carefully. When opening the packaging, do not use sharp objects that could
damage the unit.
This product comes supplied in environmentally friendly packaging. All HEATSCOPE® packaging that comes into
circulation either directly or via the trade is certified in accordance with §6 of the German Packaging Directive.
As a result, all HEATSCOPE® packaging can be disposed of in an environmentally friendly manner in collection
containers for packaging materials. The relevant legal regulations must be observed here. Further information is
available from the manufacturer.

Care information!

Important! Clean the unit with a damp cloth before using it for the first time. Do not use cleaning products
containing alkaline substances such as sodium hydroxide or soap, surfactants or solvents/alcohol.

5. Installation instructions

The INDIVIDUAL options for installing the HEATSCOPE® radiant heater are shown in the diagrams on the first
pages of this manual.
Ensure that the radiant heater is fixed securely to the installation surface. In terms of tensile and shear strength,
the fixings must be able to withstand at least 3 times the weight of the radiant heater (including accessories)
that is to be installed. When installing the unit, use the correct screws and plugs (supplied) for the surface.
Please bear in mind that you always need two fixing brackets to fix your unit safely. Please refer to the minimum
installation dimensions for the unit under „minimum distances".
It is mandatory to install the unit on a surface where it is well protected from any weather influences like rain
and dust from above; so the HEATSCOPE has to be installed under a roof, an overhang or in combionation with
an optional available weather shield.