Neutral To Ground Filter Jumper - Total Protection Solutions LowProfile 080 Operation Manual

Lowprofile series surge protective devices

Hide thumbs Also See for LowProfile 080:

Table of Contents

Fig. 5 Remote Monitoring Terminal Block

Contacts shown in energized normal state.

(no fault condition)

3. Neutral to Ground Filter Jumper

All LowProfile models with enhanced filter (model numbers end with "-F" suffix) come with a green jumper wire, which

loops out of the epoxy and connects the filter from neutral to ground. In certain medical applications or circuits which

employ GFCI protection, this Neutral to Ground filter connection should be removed.

WARNING: Prior to proceeding, ensure the LowProfile unit does not have voltage applied to its input

terminals

Removal is accomplished by cutting the green jumper wire. Once cut, both ends should be properly separated and insulated

to prevent the ends from making inadvertent electrical contact.

™

LOWPROFILE

InstaLLatIOn, OPERatIOn and MaIntEnancE ManuaL

COVER REAR VIEW

Table of Contents

Do you have a question about the LowProfile 080 and is the answer not in the manual?

Lowprofile 120