Microscope Control From The Pc - Nikon DS-U1 Instructions Manual

Microscope Control from the PC

4
Symptom
Unable to control
microscope functions.
(Or incorrect control
results.)
Unable to display
microscope status.
(Or incorrect status
information is
displayed.)
Chapter 8 Troubleshooting
4 Microscope Control from the PC
• Use only the Nikon 80i/90i Microscope. The system cannot be used
with a microscope from a different company or other Nikon
microscope models.
• Turn on the power switch for the microscope.
• Wait until the microscope is ready for operation. It takes about 30
seconds for the microscope to be ready.
• Connect the USB cable securely between the DS-U1 to the digital
imaging head on the 80i or the 90i microscope.
• Confirm that only one hub stage exists between the PC's USB port and
the DS-U1. We strongly recommend against using more than one hub.
• Use the USB supplied with the microscope to connect the microscope
to the DS-U1.
• Use the application software designed for control of the Nikon 80i/90i
Microscope.
• Make sure the microscope initial setting has been performed.
• Change the registration if the objective or filter has been changed.
- 36 -
Corrective action