Table of Contents
Advertisement
Configuring the DPC-8.5 —Continued
2
Remote controller
Enter
3
Remote controller
Setup
Notes:
• This setting affects only the analog multichannel out-
put. To delay audio from the other outputs, use the
delay settings (i.e., the speaker distance settings) on
the connected AV receiver.
• The AV Synchronization setting has no effect on
SACD (multichannel area and 2-channel area) and
196 kHz/176.4 kHz DVD-Audio.
Downloaded From Disc-Player.com Integra Manuals
Use the Left and Right [
buttons to set the delay time.
Memory
Range
Default
1
0 ms
2
0–100 ms
50 ms
3
50 ms
When you've finished, press the
[Setup] button.
The settings are stored.
Dynamic Range Control
]/[
]
(Dolby Digital Only)
DVD-V
DVD-A
With the Dynamic Range Control you can reduce the
dynamic range of Dolby Digital material so that you can
still hear quiet parts even when listening at low volume
levels—ideal for watching movies late at night when you
don't want to disturb anyone.
Off (default)
The full dynamic range is preserved.
On
The dynamic range is reduced.
Notes:
• The impact of the Dynamic Range Control depends on
the Dolby Digital material that you are playing and
with some material there will be little or no effect.
• This setting automatically reverts to Off when the
DPC-8.5 is turned on.
SACD Audio Setup
SACD
SACDs have two separate areas for storing audio—
one for multichannel audio, the other for 2-channel
stereo audio. In addition, hybrid SACDs have an extra
layer for playback in standard CD players.
setting you can determine how SACDs are played by the
DPC-8.5.
2 ch Area
The 2-channel stereo audio
Multi ch Area (default)
The multichannel audio
CD Area
The CD layer of hybrid SACDs is played.
Notes:
• If Multi ch Area is selected, and an SACD that con-
tains no multichannel area is selected, the 2-channel
area will be played.
CD Audio Setup
CD
This setting configures the digital audio outputs for use
with normal CDs or DTS CDs.
PCM (default)
Choose this option when playing normal audio CDs.
DTS
Choose this option when playing DTS CDs.
Notes:
• This setting can be set only when the DTS Out setting
for Digital Out/Digital 1 or 2 is set to "DTS->PCM."
With this
is
.
played
is
played.
61
Advertisement
Table of Contents
