Motorola DCH70 Installation Manual page 28

Cable receiver
Hide thumbs Also See for DCH70:
Table of Contents

Advertisement

4 DIAGNOSTICS
Field
Carrier Lock
PCR Lock
SNR
Modulation
Mode
Short Term
Error Count
Long Term
Error Count
Tuned Freq
Description
OSD
Description
"*"
Data received
blank
No data received
Indicates whether the digital in-band receiver is locked to the carrier
OSD
Description
YES
Carrier locked
NO
Carrier unocked
Indicates whether the in-band receiver is locked to the current program clock
reference for a digital service
OSD
Description
YES
Carrier locked
NO
Carrier unlocked
When carrier lock has been established, displays an estimate of the carrier
signal-to-noise ratio in dB, with an explanation. This estimate is based on the QAM
cluster variance, which is proportional to the SNR.
GOOD — Good value
FAIR — Marginal signal level, check the signal
POOR — Unusable signal
The values displayed on the OSD are:
64 QAM — 64 QAM digital channel
256 QAM — 256 QAM digital channel
The FEC errors (maximum count of 65535) at 5-second intervals. The Short Term
Error Count is cleared after polling.
The accumulation of the Short Term Error Count (maximum count of 65535). The
Long Term Error Count is cleared every 24 hours.
The actual frequency to which the tuner is programmed (Carrier Definition Frequency
+ 1.75 MHz).
20

Advertisement

Table of Contents
loading

Table of Contents