Separable Security - Motorola DCH70 Installation Manual

4 DIAGNOSTICS

Separable Security

This diagnostic displays information on the inserted M-CARD and CableCARD
Interface with the DCH
Field
CARD Interface
CableCARD ID
Host ID
Data ID
Validation
Pairing Rpt Method
.
Description
CableCARD Interface is a status indication of the interface between the Host
and CableCARD. It will indicate 'Good' if a Native/Legacy resource is
established between the host and card, 'Error' if an error has occurred when
establishing the Native/Legacy resource, or 'Unsupported CARD' if the
inserted CableCARD is not a Motorola M-CARD in M-Mode.
The unique identifier provided by the CableCARD.
The unique identifier in the Host Device Certificate.
A value generated by the CableCARD for the Pairing report.
•
UKNOWN if a Validation message was not received by the product
•
VALID or INVALID, as set by the Host Validation Message received
from the headend
•
BINDING if the CableCARD is busy with the binding authentication
process
•
NOT BOUND if Card validation status in not bound for CableCARD
reasons
•
HOST CERTIFICATE INVALID if the status is not bound because the
Host Certificate was invalid
•
HOST SIGN FAILED if status is not bound because of failure to verify
Host's SIGN
•
AUTH KEY FAILED if status is not bound because of failure to match
AuthKey from the Host Device
•
FAILED if binding failed for other reasons.
Set to 'MMI' or 'Reportback' as received by a message from the headend, or
24