Casio V-N500 Series Quick Start Manual page 65

If the external storage medium is removed from the terminal without performing unmount, the external
storage medium may be damaged. Make sure to implement unmount.
Remove the external storage medium from the slave unit (replication destination).
(16) Restart the slave unit (replication destination).
Press and hold the power supply button long, and shut down the slave unit (replication destination).
Press and hold the power supply button, and start up the slave unit (replication destination).
The replication of the environment on another terminal is completed.
4) Replication of the environment using the Copy Devices tool between master units
■ Facilities required
External storage medium: SD card or micro SD card
The external storage medium above is used for saving the backup data of the master unit (replication
source).
If the backup data is stored in the built-in memory internal storage) of the master unit (replication source),
the external storage medium is not necessary.
The built-in memory and the external storage medium are called "storage" in the following explanation.
If each of the built-in memory and the external storage medium should be mentioned clearly, it is described
as is.
The destination to transfer the backup data of the slave unit (replication destination) is the same storage as
the master unit (replication source).
If an SD card or a micro SD card is used as storage for the backup data, it is necessary to set (mounted) on
the terminal in advance on both the master unit (replication source) and the slave unit (replication
destination).
■ Procedure
(1) Start up the Backup/Restore tool of the master unit (replication source).
The operation of the Backup/Restore tool on the master unit (replication source) is described below.
(2) Select the storage to save the backup data in Option setting.
(3) Check All items in Backup.
(4) Tap Backup selected items in Backup menu.
The backup data is stored in the "/Backup" folder in the storage.
It is not necessary to create "/Backup" in the storage in advance.
If there is already a "/Backup" folder in the storage, the backup data is deleted.
(5) When backup is completed, finish the Backup/Restore tool.
The description above is the operation of the Backup/Restore tool on the master unit (replication source).
(6) Start up the Settings tool on the master unit (replication source), and enable WiFi-Direct in the
More... menu.
65