Select the target device, and press the OK button to start debugging.
It is possible to execute debugging by stepping, etc. on the actual terminal by setting breakpoints in the source
code.
Precautions for debugging
• It is not possible to execute debugging when the debugging application is installed on the actual terminal of
V-T500/V-N500. In such a case, uninstall the debugging application on the actual terminal of
V-T500/V-N500 before executing debugging.
Debugging with the emulator
When Debug is selected, debugging starts on the emulator if an existing emulator is operating, and by starting
the emulator newly if no emulator is operating.
It is possible to execute debugging by stepping, etc. on the V-T500/V-N500 emulator by setting breakpoints in
the source code.
37