GE JCKS10 Installation Instructions Manual page 7

Installation Instructions
Cutout for 30"
A
Under Counter
Gas or electric cooktops may be installed over this
oven. See cooktop installation instructions for cutout
size. See label on top of oven for approved cooktop
models.
63.5 cm (25")
Top and/or side fillers
may be necessary
if unit is positioned
between existing
cabinets. Be sure
they are attached
securely, since they
will anchor the oven
in the cabinet.
1.9 cm (3/4")
Support Platform
Required
MUST SUPPORT 68 Kg (150 LBS.)
(76.2 cm)
For JCTP30, JCTP70, PCT916, PCT920 models only.
72.4 cm
(28 1/2") Min.
72.7 cm
(28 5/8") Max.
69.2 cm
(27 1/4") Min.
69.4 cm
(27 5/16") Max.
Single Built-In Ovens only
240V / 208V
Junction Box
Location (junction
box may be in
adjacent cabinet)
24.1 cm
(9 1/2")
Max.
Allow 2.5 cm
(1") overlap
top of oven,
1.8 cm (11/16")
overlap side
edges of cutout
and 3.2 cm (1 1/4")
overlap bottom
of cutout
Must
match
toekick
height
NOTE: This oven is only approved to
be installed under the specific models
as labeled on this unit.
7
Gas and electrical connections
for gas cooktop must be located
in an adjacent accessible location
to the right.
55.9 cm (22")
91.4 cm (36")
Min. Above
Typical
Support
Countertop
Platform
Height
61 cm (24")
10.2 cm (4")
Typical
Toekick