Ws/Rs Remote Control Unit - Viessmann Dekamatik-HK1 Installation Instructions Manual

Accessories (continued)
Wall mounting fixture
Fig. 13
Connecting the wall mounting fixture to the Dekamatik-HK1
WS remote control unit
RS remote control unit
Remote control unit
Fig. 14
Connecting the remote control unit to the Dekamatik-HK 1
Electrical Connections
4. Mount the wall mounting fixture in
accordance with the separate
installation instructions.
5. Connect the 2-wire cable from the wall
mounting fixture to connector
terminals "1" and "2" (the wires are
interchangeable).
6. Break open the cable bushing; install
strain relief clamp.
7. Insert connector in socket "X 16" in
the terminal compartment (see
page 10); install strain relief clamp.
8. Insert the programming unit in the wall
mounting fixture.
1. Mount the remote control unit in
accordance with the separate
installation instructions.
2. Connect the 3-wire cable from the
remote control unit to connector
3. Break open the cable bushing; install
strain relief clamp.
4. Insert connector in socket "X 1" in
the terminal compartment (see
page 10); install strain relief clamp.
at
.
15