Brush/Pad-Holder Deck Disassembly/Assembly [Micromatic M17B] - Nilfisk-Advance Micromatic M17B Service Manual

BRUSH/PAD-HOLDER DECK DISASSEMBLY/ASSEMBLY [MICROMATIC M17B]

Disassembly
1. Remove the batteries.
2. Remove the caps (A) and disconnect the electrical connections from the brush motor (B).
3. Remove the left deck fastening screw (58).
4. Use a protection (D) to avoid damaging the machine and tilt it carefully to lay its left side on the floor.
5. Disconnect the solution hose (E) from the solenoid valve (F).
6. Remove the right deck fastening screw (57).
7. Remove the deck (H).
Assembly
8. Assemble in the reverse order of disassembly, and note these items:
• When reassembling the deck (H), reinsert the deck fixing springs (I) correctly.
Micromatic M17B - Micromatic
TM
SERVICE MANUAL
M17E 9097091000(1)2007-06
TM
ENGLISH
OTHER SYSTEMS
S301219
S301220
31