Menu And Settings; Menu Navigation; Braking Mode; Torque Sensor - Stromer ST2 User Manual

i
• Charge your battery at room temperature.
• In the event of a malfunction or if the battery is
in a deep sleep, connect the battery to the
battery charger for at least one minute. The
battery management then automatically checks
the battery and can rectify faults. If this is not
productive, contact your Stromer dealer.
• Avoid touching the contacts on the bottom
of the battery. This could lead to the battery
switching off.
!
Under no circumstances must you perform
the following with your battery:
• Short it
• Place it in water or clean it with water
• Open or tamper with it
• Charge it with a different battery charger Press the power button again to return to the rid-
• Expose it to a source of heat or flame ing mode screen. More detailed information on
the individual settings can be found in the corre-
sponding subchapters or online at www.stromer-
bike.com.

Menu and settings

i

Menu navigation

The mode of operation of the described set-
Press the power button to access the shortcut
tings can change with a software update. A de-
screen. Here you have direct access to all func-
scription of the current functions can be found
tions and settings:
online at www.stromerbike.com.
12 | 13
!
The menu is only available if your ST2 is
stationary. As soon as you take off, the touch-
screen changes to the ride screen. For your safety,
you cannot call up the menu while riding.

Braking mode

As soon as you brake, the motor switches to brak-
ing mode. The braking energy is stored in your
battery and thereby increases the battery range
of your ST2. Using the regenerative braking lev-
el, you can adapt the strength of the ST2 engine
brake to suit your riding style.
1. In MENU, press BIKE.
2. In the BRAKEMODE rubric you can set the
strength of the braking mode.

Torque sensor

The response behaviour of the ST2 can be adapt-
ed to your riding style. With the sensor sensitiv-
ity, you can define the ratio between rider power
and motor assistance. A higher sensitivity leads
to your Stromer already reacting to the slightest
pressure on the pedals.
1. In MENU, press BIKE.
2. In the TORQ.SENS. rubric you can set the
sensor sensitivity.
1. In MENU, press SETTINGS.
i
2. In the TIME/DATE rubric you can select the
A change to the sensor sensitivity influenc-
es the response behaviour of the ST2 in all assis- desired display format as well as set the time
tance stages. A high degree of sensitivity decreas- and date.
es the range.

Languages

Daytime light

The ST2 supports the following languages: Ger-
For your safety, the ST2 is equipped with daytime man, English, French, Italian and Dutch.
light. As soon as you switch on your Stromer, the
1. In MENU, press SYSTEM.
daytime light turns on. As soon as you switch on
2. In the LANGUAGES rubric you can set the
the headlight, the daytime light is dimmed slight-
ly so that oncoming vehicles are not blinded at desired language.
night.
Units (km /m iles)
If you prefer to do without the daytime light, you
can deactivate it.
The ST2 supports metric (m; km; km/h; Wh/km)
and Imperial (ft; miles – mi; mph; Wh/mi) units
1. In MENU, press LIGHT/LCD.
of measurement.
2. In the DAYLIGHT rubric you can activate and
deactivate the daytime light.
1. In MENU, press SYSTEM.
2. In the UNITS rubric you can select the desired
!
unit of measurement.
We recommend always activating the day-
time lights. You are perceived better by other road
users as a result and increase your safety in traffic.

Parts

Replacement of add-on parts
i
The daytime light is not legally permitted in
on the ST2
certain countries and therefore cannot be activat-
In general, only use original parts approved by
ed there.
Stromer for your ST2.

Time/date

You can set the time and date as well as their dis-
play format individually.
Certificate of Conformity
For type approval of the ST2, certain parts were
determined that must not be changed. This means
that the approval as per L1e only remains valid as
long as the original parts are used. The following
parts can only be replaced with identical original
parts, otherwise the certificate of conformity of
your ST2 is invalid.
1. Frame
2. Fork
3. Motor unit
4. Battery
5. Tires
6. Rims
7. Brake system
8. Front light
9. Rear light
10. License plate bracket
11. Side stand
12. Handlebar
13. Stem
Tires
Replacement tires for your ST2 must meet the fol-
lowing requirements:
All tires used on the ST2 must have an E-approval
for fast e-bikes in accordance with ECE R75.
For example: E4 75R 0007911