JBL Application Engineered Series Application Manual page 17

Array A5
A O
RRAY VERVIEW
This array is an excellent choice for larger rooms as part of Left/Right or exploded clusters
•
where exceptional gain before feedback is required.
Spaced-source low-frequency drivers combine with the large mid-frequency waveguide to
•
maintain pattern control through 125Hz.
This array may form the basis of larger arrays where polar pattern consistency is required to a
•
very low frequency.
This system may be augmented with ground supported ASB6128 or ASB6128V subwoofers.
•
Tech Note V1 #32
Refer to
•
Array Specifications
Loudspeakers: (1) PD5322/64 or PD5322/95, (1) PD5122
•
Overall Coverage: 60°/90° horizontal x 40°/50° vertical
•
• Frequency range: 41 Hz – 19 kHz
Maximum SPL (1 meter equivalent): MF/HF 134 dB-SPL continuous average, LF: 134 dB
•
Total Power Capacity: 2700W continuous pink noise
•
Overall Dimensions: 54" H x 26.5" W x 28" D (1323 x 673 x 706 mm)
•
Total Loudspeaker Weight: 250 lbs. (113.6 kg)
•
Recommended Amplification:
PD5322 LF and PD5122: 2 ch. 2000w (Crown IT4000), M/H: 1 ch. 600w (Crown CTs 1200)
Recommended DSP:
2 channels required. [Crown PIP-USP3, dBX Driverack PA, BSS FDS-334, BSS SoundWeb]
Processing for both LF sections is identical for standard use.
Available Accessories
3 pc. M10 x 35mm Forged Shouldered Eye-Bolt Kit (JBL part #229-00009-01)
Full Range array with Integrated Bipole Low Frequency
Precision Directivity 3-way loudspeaker array with
companion spaced-source low frequency enclosure
for additional application information.
-17-