Alcatel-Lucent IP Touch 4088 EE Installation Manual page 9

local_sips_port=
sip_transport_mode=0
local_rtp_port=42000
local_rtcp_port=42001
prack_type=0
preferred_vocoder=0,4,8,18
authentication_realm=
authentication_name=
authentication_password=
user_name=
display_name=
voice_mail_uri=
message_waiting_indication_uri=
[qos]
sip_diffserv=0
rtp_diffserv=0
All Rights Reserved © Alcatel-Lucent 2009
Enter the port number used by the SIP set used
in secured mode
Enter level transport mode:
– 0 for UDP or TCP
– 1 for UDP only
– 2 for TCP only
Leave the default value
Leave the default value
Enter PRACK type :
- 0 = PRACK supported
- 1 = PRACK required
- 2 = PRACK disabled
Enter the preferred voice coder:
– 0 for PCMU
– 8 for PCMA
– 4 for G723.1
– 18 for G729A
If no authentication, leave empty
If no authentication, PUT A VALUE LIKE none
If no authentication, leave empty
Enter the name of the user
Enter the name to be displayed on the set
Enter the URI or the call number of the voice
mail
Complete SIP URI of the voice mail
Page 9