Levelling the cooker
Important!
Using the supplied adjustable feet is
MANDATORY. For safety reasons and to
ensure adequate ventilation, the cooker
chassis MUST NOT sit directly on the floor, a
plinth, or other support surface.
To fit the adjustable feet:
Rest the rear of the cooker on a piece of
1
packaging, exposing the base for fitting
the feet.
Screw the four feet to the cooker.
2
Stand the cooker and level it by
3
screwing or unscrewing the feet
with an adjustable spanner. Use the
supplied nuts if necessary, see Figs. 2b
and 2c.
0
+ 8
+ 8
+ 15
mm
mm
mm
Installation instructions
Fig. 2a Fitting the adjustable feet
(supplied with the cooker in the feet kit)
Fig. 2b Do not use the supplied nuts for height
adjustments between 0 and 8 mm.
Fig. 2c Use the supplied nuts for height
adjustments between 8 and 15 mm.
7