Table of Contents
Advertisement
Insignia 50" LED TV
AV (composite video) (good)
Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
On your TV
AV
Audio cable
(composite
connectors
video) cable
connector
AV
Analog
(composite
audio jacks
video) jack
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an AV cable (not provided) to the green VIDEO/Y jack and AUDIO L and R jacks on the back of your TV
and to the AV OUT jacks on the DVD or Blu-ray player.
Notes
• The VIDEO/Y, P
• When you connect the audio using the AUDIO L and R jacks, the audio
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
or
to select Component/AV, then press ENTER.
25
VIDEO/Y jack.
, and P
B
R
device) share the AUDIO L and R jacks with the VIDEO/Y jack (used to
connect an AV (composite video) device).
output is analog.
www.insigniaproducts.com
Back of TV
video jacks (used to connect a component
DVD or Blu-ray player
AV cable
(composite video cable)
Advertisement
Table of Contents
