Remote Control - Insignia NS-50D550MX15 User Manual

Remote control

Problem Solution
Remote
• Make sure that the power cord is
control does
correctly connected to your TV
not work.
and a power outlet.
• Make sure that there are no
obstructions between the remote
control and the remote control
sensor on the front of the TV.
• Point the remote control directly
at the remote control sensor on
your TV. For the location of the
remote control sensor, see "Front"
on page 12.
• The supplied batteries are
wrapped tightly in clear plastic.
Make sure that you have removed
this plastic from the batteries.
• Make sure that the batteries are
installed correctly. See "Installing
remote control batteries" on
page 38.
• Replace dead batteries with new
batteries. See "Installing remote
control batteries" on page 38.
Trouble
• See instructions and a table of
programming
common codes in "Programming
your existing
universal remote controls" on
universal
page 80.
remote
• Codes are subject to change. For
control.
up-to-date codes, go to
www.insigniaproducts.com/remotecodes
• Replace dead batteries with new
batteries. Refer to the User Guide
that accompanied your universal
remote control.
• Refer to the User Guide that
accompanied your universal
remote control and contact the
manufacturer if problems persist.
www.insigniaproducts.com
NS-50D550MX15 Insignia 50" LED TV
74