Adjusting the sound
Adjusting sound settings
You can adjust sound settings to improve the sound
quality. You also can reset all sound settings to the
factory default.
1 Press MENU. The on-screen menu opens.
2 Press
or
to highlight AUDIO, then press
ENTER. The AUDIO menu opens.
3 Press
or
to highlight an option, then press
ENTER to access the option. You can select:
• Sound Mode—Selects the sound mode. You
can select:
• Standard—Balances treble and bass. This
setting is good for watching standard TV
broadcasts.
• Theater—Enhances treble and bass for a
rich sound experience. This setting is good
for watching DVDs, Blu-ray discs, and
HDTV.
• Music—Preserves the original sound. This
setting is good for listening to music.
• News—Enhances vocals for TV audio. This
setting is good for watching news
broadcasts.
• Custom—Lets you manually adjust sound
settings.
• Balance—Adjusts the balance between the
left and right audio channels.
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• TV Speakers—Selects where to play TV audio.
When you connect headphones to your TV,
audio plays through both the headphones
and the TV speakers. You can select:
• Auto (default setting)—Automatically
turns off the TV speakers when you
connect a device to the
jack. When the device is disconnected, the
TV speakers turn on automatically.
• On—Always plays the audio through the
TV speakers. If a device is connected to the
/AUDIO OUT jack, the audio is played
through both the TV speakers and the
device.
• Off—Turns off the TV speakers and plays
the audio only through the device
connected to the
you disconnect the device, the TV speakers
remain turned off.
or
/AUDIO OUT
/AUDIO OUT jack. If
www.insigniaproducts.com
NS-50D550MX15 Insignia 50" LED TV
• Digital Audio/SPDIF—Sends digital audio to
an external audio system. You can select:
• RAW (to pass through the original digital
audio sound).
• PCM (to output audio in 2-channel stereo).
• Digital Audio Delay—Fine tunes the audio
when it is not in sync with the video.
• MTS/SAP—(Analog channels only) Selects the
audio mode. You can select:
• Mono—Select this option if there is noise
or static on weak stereo broadcasts.
• Stereo—Select this option for programs
broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
Note
You can also press MTS/SAP one
or more times to select the
audio mode.
• Audio Language Default—(Digital channels
only) Selects an alternate audio language, if
available.
• Headphone/Audio Out—You can use the
/AUDIO OUT jack on the side of your TV to
connect headphones, a home theater system,
sound bar, or external speaker system. You can
select:
• Headphones/Audio Out
Variable—Select this option to use the
remote control that came with your TV to
control the audio from headphones, a
home theater system, or a sound bar you
connected to the AUDIO OUT/
• Audio Out Fixed—Select this option to
use the remote control that came with the
home theater system or sound bar you
connected to the AUDIO OUT/
control the audio.
• Reset Audio Settings—Reset all audio
settings to factory defaults.
4 Press
or
to adjust the option, or press
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
jack.
jack to
or
54