Table of Contents
Advertisement
Review this chart to find do-it-yourself
solutions for minor performance
problems. Any service
needed, other than those described
in this owner's manual, should be performed
by a Sears
authorized
service representative.
IbWARNING
Electrical
Shock Or Personal
Injury Hazard
Disconnect
electrical
supply before servicing
or cleaning the vacuum cleaner. Failure
to do so could result in electrical
shock or personal
injury.
Vacuum cleaner
won't run.
Poorjob of dirt pick-up.
1. Unplugged at wall outlet.
2, Tripped circuit breakedblown fuse
at household service panel.
3. On/off swilch not turned on.
4. Thermal protector tripped.
1. Full or clogged dust bin.
2. Wrong pile height setting.
3. Worn agitator.
4. Clogged nozzle or dust bin port.
5. Clogged hose.
6. Hole in hose.
7. Broken/misplaced belt.
8. Hose not inserted fully.
g. Motor protection system activated.
10. Dirty filters.
1. Plug in firmly,pushon/offswitchto on.
2. Reset circuit breaker or replace fuse.
3, Push on/off switch to on.
4. Reset thermal protector.
1. Clean dust bin.
2. Adjust setting.
3. Replace agitator.
4. Check CLOG REMOVAL.
5. Check for clogs.
6. Replace hose.
7. Replacelfixbelt.
8. Insert hose fully.
9. Check for clogs.
10. Clean/change filters.
Vacuum cleaner picks up
1. Wrong pile height setting.
1. Adjust setting.
moveable rugs or
pushes too hard.
Light won't work.
1. Burned out light bulb.
1. Change light bulb.
Agitator does not turn,
1. Brokenbelt.
I. Replace belt.
2. Belt installedincorrectly.
2. Check BELT CHANGING AND
AGITATOR CLEANING.
Air flow restricted
1. Attachment use restrictsair flow.
1. Check ATTACHMENTS,
with attachment use,
2, New carpet fuzz clogged air path.
2. Check CLOG REMOVAL and clean
Sound changes,
hose.
24
Advertisement
Table of Contents
