Table of Contents
Advertisement
Check primary
filter frequently
and clean
when dirty. Remove
the dust bin assembly
as outlined
in the DUST BIN CLEANING
section
and empty contents
of dust bin.
Make sure dust bin is empty before filter is
removed.
Grasp filter screen,
rotate
counter-clockwise
and lift out.
- Primary
Filter
Filter
Screen
Grasp
primary
filter, rotate counter-
clockwise
and lift out. Clean primary
filter
by gently tapping
over a trash container.
The filter may be cleaned
by tapping
it on a
firm surface.
Tap on several
sides to
ensure
best cleaning.
Every 6 months
rinse filter exterior with
water under a faucet. Once the filter is
rinsed clean, dry with a cloth and let air dry
for 24 hours.
Rinse with water only, do not use detergent
or soap. Allow
filter
to dry 24 hours
before
putting
it back into the dust bin.
When the cleaning
of the filter no longer
restores
vacuum
cleaner
suction
to full
power you need to replace
the filter.
Before replacing the primary filter it is a good
idea to clean the inside of the dust bin and lid
area.
AIIgnment
Rotate filter clockwise
until slots lock onto
tabs in lid.
To re-install
the filter screen,
align tabs on
filter screen with tabs on lid.
Alignment
_
Tabs
_
";
_
@
Rotate filter screen clockwise to lock in
place.
Lid
Filter
Before replacing the filter it is a good idea to
clean the inside of the dust bin and lid area.
Rotate filter clockwise until slots lock onto
tabs in lid.
NOTE: 'Under normal use and care, your fil-
ter can be expected to last up to 3 years.
NOTE: See Parts and Features for Filter
number.
15
Advertisement
Table of Contents
