Table of Contents
Advertisement
TO CLEAN AGITATOR
NOTE: In order to keep cleaning efficiency
high and to prevent damage
to your vacuum
cleaner, the aqitator must be cleaned every
time the belt is changed.
The agitator must also be cleaned accord-
ing to the following
schedule:
Vacuum
Cleaner
Use
Clean Agitator
HEAVY
-
(used daily)
MODERATE
-
(used 2-3 times/week)
LIGHT -
(used 1 time/week)
every week
every month
every 2 months
Remove any dirt or debris in the belt path
area or in the agitator area.
Agitator Assembly
TO REPLACE BELT
NOTE: See PARTS AND FEATURES
for
belt number.
Loop the new belt on the motor shaft.
Loop the end of the new belt on the agitator.
Insert the agitator
by placing
the rounded
portion
of the end cap down into the slot
in the nozzle
base.
Motor
Shaft
Belt Groove
I
NOTE: Care must be taken due to the belt
tension during reassembly.
BELT
ROUTING
Press firmly, checking to see that each end
is completely
inserted.
Agitator Assernbly
Check to see that the belt is centered in
the belt groove. Turn the agitator with your
fingers to see that it turns freely.
19
Advertisement
Table of Contents
