Audio connector (CN13)
The PCM-5896 provides all major audio signals on a 14-pin flat-
cable connector, CN13.
Attach the Mic In, Line In, and Audio Out to the corresponding
pins as shown in the following table.
Audio connector (CN13)
Pin
1
3
5
7
9
11
13
CAUTION: Both Line-out and Speaker-out modes share
34 PCM-5896 User Manual
Signal
Mic In
GND
Line In Left
Line In Right
GND
Audio Out Left
GND_Line out
the same pair of Audio Out signal lines but
different grounds. In addition to setting up
J12 on page 21, make sure you use the corre-
sponding ground signal when making the
cable by yourself.
Pin
Signal
2
Reserve for future use
4
Reserve for future use
6
Reserve for future use
8
Reserve for future use
10
Reserve for future use
12
Audio Out Right
14
GND_Speaker out