Assembly Instructions - Kenmore 116.28614 Owner's Manual

Please pay special attention to these hazard alert boxes, and follow any instruc-
tions given. WARNING statements alert you to such dangers as fire, electric
shock, burns and personal injury, CAUTION statements alert you to such dangers
as personal injury and/or property damage.
WARNING
Electrical Shock Hazard
DO NOT plug into electrical supply until
assembly is complete. Failure to do so
could result in electrical shock or
injury.
Before assembling vacuum cleaner, check
the PACKING LIST. Use this list to verify
that you have received all the components of
your new Kenmore vacuum cleaner.
WAND-TELESCOPING
The wand length is
adjustable and __2
requires no
assembly. To
adjust, simply
push down on the
wand, ju, bo.oo
and slide the
upper wand to the Wand
Length
desired height Adjust
Button
The swivel, located
'_J"*'-Keep
Hand
Above
This
Tab
u
m
Wand
on the PowerMate,
allows you to turn
the handle to the left
side to reach farther
under low furniture.
When adjusting the
wand length you
may have to hold the
PowerMate with your
hand or foot,
POVVERMATE
insert wand into PowerMate until the wand
button snaps into peace.
To remove: Step on wand release pedal,
then pull up on wands..
Lock
Button
Handle
Quick --
Release o
Button
_jl
Telescoping
Wand
N
U
-- Wand Length
"1 Adjust Buiton
=_---- Wand
__ Button
}uick
Release Pedal
i_?& __