Table of Contents
Advertisement
11.1 Preparation for the printer
1. Printer installation and power connection
2. Data cable installation and connection
Plug in the data card (INFINITI Fast SCSI II Adapter Card) to socket of PCI on computer
•
Connect the data card to COM on computer by a serial cable
•
Connect Printer to the data card by corresponding cables.
•
3. Cleaning for Ink Supply System and Print head
See 8.3.1 for details
11.2 Prepare software
1. Installation of Feiyeung RIP Software
2. Installation of printer driver
3. Installation of curves
4. Registration of the RIP
5. Loading important curves and data from the RIP software
In order to print with better quality, you need install the following Spectra curves to right places:
•
Curve of Ink Viscosity
Curve of Voltage
•
Curve of Linearization
•
Curve of Color Tune
•
After installation, you have to download a labeled voltage from Printer for each print head ; otherwise,
printer will not work or print with bad quality.
Note: If you want to cancel a task during printing, you may use the RIP software to do so. If you prefer to
cancel a task on Printer, you need wait until "Printing Cancel" displays on Menu (Printer now is on Offline
Mode).
11.3 Adjustment
Adjust Printer using the Try, including the following:
The adjustment of head's angle
•
The adjustment of the four heads' superposition
•
The adjustment of Bidirection
•
Feed compensate
•
•
Bidirection compensate
The first three adjustments are more important.
11.4 Maintenance for print head
FY operation manual
- 43 -
Chapter 11
MAINTENANCE GUIDE
Advertisement
Table of Contents
