Table of Contents
Advertisement
During a normal operation process, open valve, the handle point to Position 3；After printing task, put
valve on position 2.
Tube Connector：
Channel connected by M tube connector and F tube connector.
Tube Cap：to seal a channel.
6.2 Multi-function Auxiliary Board and Description
Multi-function Auxiliary Board (MFAB) has many functions. It can control ink supply, cleaning and
heating. Function Keys described below:
5 Set Temperature
1、K1
Function Key，used to select any functions, including：
F1：out of Manu，back to Temperature display
F2：AP，start Air Pump（Low）
F3：AP，start Air Pump（Medium）
F4：AP，start Air Pump（High）
F5：TF，set up temperature for front heater，30℃～60℃ adjustable
F6：TR，set up temperature difference between rear heater and front heater, 0℃～8℃
adjustable （temperature in the rear is lower than the front).
FY operation manual
7
8
9
10
2 K2
1 K1
Figure 6-3 Multi-function Auxiliary Board
- 22 -
11
12
13
4 K4
3 K3
6 Actual Temperature
Advertisement
Table of Contents
