Page 1
FY operation manual Operation Manual 6250LQ Thank you very much for purchasing INFINITI In order to use INFINITI correctly and safely and understand this product’s capability, please read this manual carefully. The manual includes equipment structure, description, technical parameters, operation manual, safety information, application of software, etc.
TECHNICAL SPECIFICATION CHAPTER 3 EQUIPMENT ASSEMBLY AND ADJUSTMENT 3.1" Assemble Digital Printer 3.2" Adjust Digital Printer 3.3" Cautions before Turn on INFINITI 6250LQ CHAPTER 4 EQUIPMENT STRUCTURE AND ACCESSORIES CHAPTER 5 PANEL BASIC OPERATION 5.1" Menu Structure of Control Panel 5.2"...
FY operation manual Chapter 1 SAFETY INFORMATION 1.1" Important Safety Information Before using your INFINITY FY6250LQ InkJet Digital Printer, Please read following safety information. Pay attention to the cautions on the Printer. Don’t block the hole on the cover. •...
Page 4
FY operation manual 1.5" Caution, Warning and Attention Caution Must obey in order to ensure person’s safety. Warning Must obey in order to protect the machine. Attention It includes the important and useful information about operation. - 4 -...
FY operation manual Chapter 2 TECHNICAL SPECIFICATION Figure2-1 Outlook Production Type INFINITI Serials:6250LQ Print technique 6250LQ:SPECTRA SL-128 piezo head, 4 heads inside Resolution 180dpi、270dpi、360dpi、540dpi、720dpi Pattern quality Photo effect (basic, high quality) Media width 2530mm Max printing width 2520mm Display LCD display with 8 key panels Ink type Solvent-base:C, M, Y, K...
Page 6
FY operation manual Auto cleaning device with anti-clogged flash function and auto Print head cleaning system adjustable purging setup Safety system Inside safety lock with function or shut down system Printing interface High speed data transport PCI card Print Language HH-RTL printing language Noise Printing status≤...
FY operation manual 3.3 Cautions before turn on INFINITI 6250LQ 1. In order to make print head clean easily, please be equipped with: Chemical reagent: CH COCH • Cleanroom wiper. • 2. In order to inspect temperature and humidity for working surroundings, please prepare measure instruments/gauges with measurement functions of humidity and temperature.
Page 11
FY operation manual Figure 4-6 INFINITI 6250LQ Print Head:4 piezo print heads for INFINITI 6250LQ Printing media: Printing board: Power Switch:Turn on/off Printer Clamp Pole:Control roller up / down for loading or unloading media Press Roller:Corporate with rubble feed roller and make media move smoothly LCD Control Panel:To set up parameter, execute all function and changing printing mode...
Page 12
FY operation manual 14. Main Waste Ink Bottle:Use to collect the waste ink 15. Vacuum: 16. Vacuum Power Socket: 17. Suck Mouth: 18. Waste Ink Bottle:Use to collect the waste ink from suck mouth 19. Main ink tank and cleaning solution tank:a total five lines, including C, M, Y, K and solvent flushing, 800ml/each 20.
FY operation manual Chapter 5 PANEL BASIC OPERATION 5.1 Menu Structure of Control Panel Direction Key Function Key Figure 5-1 Control Panel Function Keys 1. Direction (Arrow) Key 2. Function Key 1) ONLINE:Use to switch between online mode and offline mode; press down for 3-4 seconds to pause a printing task 2) ESC:Back to the upper menu 3) ENTER:Confirm the menu command and execute it...
FY operation manual 1. Moving System + MENU 2. Clean Tools 3. Adjustment OFFLINE CH6250LQ 4. Options Figure 5-2 Main Menu Sign + stands for submenu followed. Sign – stands for no submenu followed. In this case, press key of the arrow keys can circularly display these four menus up and down. When there’s a sign “+”...
Page 15
FY operation manual X-Move Move Press ENTER key, flashes on and off on the LCD screen. Press key of the arrow keys can cause media move back and forth. Press ENTER key to confirm when move to the right location. Y-Move XXXX Press ENTER key, number...
Page 16
Press <FUNC> to run Test Print Refer to the software INFINITI 6250LQ (TRY) for details. Set up a speed at level 4 for best result. Note: An engineer usually completes it. Customers do not need adjust it by themselves. Rectangle Feed compensation.
FY operation manual 5.2.4 Options Purge Times MENU Purge Quantity Paper Detect OFFINE Fan Velocity Purge times Set up number of lines, print head will clean with negative pressure automatically after reaching the number. No purge applied if setting is “0”. Purge Quantity Set up the amount of ink sprayed after cleaning print head.
Page 18
FY operation manual When printing, the LCD displays as bellows: Total lines of printing task PRINT PROJECT Lines were done LINE: TOTAL: XXXX FINSH: XXXX Lines RIP ready RIP READY: XXXX Figure: Interface of Printing Total lines of printing task, the lines were done and the lines RIP ready are shown on LCD screen. 10.
Page 19
FY operation manual Chapter 6 INK SUPPLY、 CLEANING SYSTEM AND DESCRIPTION FOR MULTI-FUNCTION AUXILIARY BOARD 6.1" Ink Supply and Cleaning System Figure 6-1 Ink Supply and Cleaning System(Right) 1. Main ink tank C 2. Main ink tank M 3. Main ink tank Y 4.
Page 20
FY operation manual 10. Ink filter M 11. Ink filter F 12. Ink filter K 13. Ink filter Y 14. Governor valve Governor valve: used to control air pressure. Increase the pressure when fixed; Decrease the pressure when loose. Figure 6-3 Ink Supply and Cleaning System(Back) 1.
Page 21
FY operation manual 8、F Connector 9、Tube Cap Incoming Ink Print head Figure 6-5 Ink Supply and Cleaning System(Front) 4、Handle 1、M End 2、F End 3、F End (sealed) Figure 6-6 Air Valve Air Valve: 1、 M End(Input) :Air input 2、 F End(Output) :Air output 3、...
Page 22
FY operation manual During a normal operation process, open valve, the handle point to Position 3;After printing task, put valve on position 2. Tube Connector: Channel connected by M tube connector and F tube connector. Tube Cap:to seal a channel. 6.2 Multi-function Auxiliary Board and Description Multi-function Auxiliary Board (MFAB) has many functions.
Page 23
FY operation manual 2、K2 To adjust temperature. 0℃~9℃ is adjustable, when F5 and F6 are applied. 3、K3 To display the two temperatures alternative and adjust the values. 10℃ adjustable when press this key once. 4、K4 Confirmation Key Attention:K2+K3:Press K2 and K3 will display FC FP. Then press K4 to confirm, Cleaning Pumpwill start. 5、Digital Display Used to display temperature setting;...
FY operation manual Chapter 7 INK SUPPLY SYSTEM 7.1 Summary This ink supply system provides automatic and manual supply functions. It can control several lines of pump supply ink at the same time. It has perfect interface. It also can adjust ink supply pressure and provides protect function.
FY operation manual Preset ink supply interface and ink supply pressure setting. As soon as the printer’s power on, system will detect floating switch signal automatically. When a line lacks of ink, system starts ink pump and corresponding indicator light will turns on. After the ink level is the setting value, ink pump will work for a while and then stop.
FY operation manual Chapter 8 CLEANING SYSTEM 8.1 Summary There are three cleaning methods: cleaning by positive air pressure, cleaning by cleaning solution and cleaning by negative air pressure. You have choices of Auto Cleaning and Semi-auto Cleaning, in the following circumstances: before printing, during printing and in a certain period for idle.
Page 27
FY operation manual Open a cap on sub-tank of cleaning solution (F) • Connect tube F to tube M (C, M, Y, K line) respectively • Press K2 and K3 synchronously, after confirming by K4, cleaning solution comes out from •...
Page 28
FY operation manual Before cleaning print heads: Move print head to Clean Position • Open a cap on sub-tank of cleaning solution (F) • Connect tube F to one of tube M (C, M, Y, K line) • Then: ① Press K2 and K3 synchronously, after confirming by K4, then cleaning pump starts to work. ②...
FY operation manual Chapter 9 HEATING SYSTEM 9.1 Summary This heating system can adjust its temperature based on different PVC material and surrounding. It can adjust the temperature automatically to match a setting temperature. Customer can have satisfied printing effect. 9.2 System Diagram Temperature adjust switch Heating driver temperature signal...
Page 30
FY operation manual 6、An inner heating board is used. It is easy to install, no extra space needed and longer life warranty. 9.4 Working processing and characteristics To set up basic temperature (30℃~60℃) by function key F5 on operation board. Temperature difference (0℃~8℃) between the front and the rear can be set up by function key F6 on operation board.
FY operation manual Chapter 10 SOFTWARE OPERATION 10.1 Installation 1. Installation of Feiyeung RIP Software: see the RIP User’s Manual for details. a) Insert RIP CD into computer b) Run setup.exe c) Follow the instruction to finish the installation 2. Installation of printer driver a) Insert FY CD into computer b) Run setup.exe under directory of TRY SETUP c) Follow the instruction to finish the installation...
Page 32
FY operation manual Figure 10-2-1 Open Try Open Try,the interface show as below: Figure 10-2-2 Try interface select 6320LQ Select printer type first: please on the printer Menu; see below: - 32 -...
Page 33
FY operation manual Figure 10-2-3 Select printer types Open File, set up print parameters, see figure below: Figure 10-2-4 10.2.2" Set up print parameters Figure 10-2-5 Set up print parameters This function used to set up printing parameters, select printing mode, unidirection or bidirection printing - 33 -...
Page 34
Press “More”, the following warning shows up: Figure 10-2-6 Warning Message Press “Yes” to confirm, a dialog box for setting up parameters pops up as below: Figure 10-2-7 6250LQ Setting dialog box Distance coefficient for a print head expresses as below: Y Direction(360DPI) :Yc=0 C is basis Ym=496...
Page 35
FY operation manual default value is 0. Note: Please press Download first to download original data of the machine before making any changes. 1) Introduction of head install parameter Head install parameter:used to adjust the gradient of print head 360DPI:printing resolution of Y direction, e.g. horizon direction 1080DPI:maximum printing resolution of X direction, e.g.
Page 36
Speed. Operation steps: 1) Set up Adjustment\Speed (< = 13) on Menu M3-3 on the Operation Control Panel for 6250LQ. 2) Set up Adjustment\Bid Adjust to 0 on Menu M3-3 on the Operation Control Panel for 6250LQ. Press “ENTER” to confirm, then Press “ONLINE”, Printer is in Online mode.
Page 37
To compensate feeding on Y direction, following by: 1) Select 360x180 1Pass,Adjustment\Rectangle on operation control board is not available for 6250LQ. Press ONLINE make printer Online Mode. 2) In 6320LQ Try,open testing file named 180.group Figure 10-2-12 Feeding compensation image (180.group) ”...
Page 38
FY operation manual Figure 10-2-12 Dialog box for setup print head voltage 1) Load Ink Viscosity Curve: Press “Viscosity File” button, select spectral.ink for FY6250LQ. The curve shows relationships between ink viscosity and temperature. 2) Load Voltage Control Curve: Press “Read Curve” button, select spectra.crv for FY6250LQ. The curve shows relationships between voltage and temperature.
Page 39
FY operation manual Setup voltage value: There is a Calibrated Voltage for each head from manufacture. The value is gauged under standard surrounding. However, the voltage is difference between standard and actual working surrounding. Usually, you need setup a voltage lower (10% - 15%) than a calibrated voltage for better printing quality. For example, if Calibrated Voltage is 100V, you may setup voltage value between 85V and 90V.
Page 40
FY operation manual 1) Select “File” / “Print”, pop up a dialog box, see below: Figure 10-3-2 Dialog box for printing 2) Press “Modify” button, a dialog box shows below. Set up corresponding parameters. Figure 10-3-3 Setup print parameters 3) Press “Setting” button, set up the parameter according to the fields. - 40 -...
Page 41
FY operation manual Figure 10-3-4 Large page devices 4) Press “Property”, a dialog box shows below: Figure 10-3-5 Set up print parameter a. Select corresponding resolution. Print Mode is the same as 6320LQ in RIP, including 8 modes: 360×180 1Pass,360×180 2-1Pass,360×270 1Pass,360×270 2-1Pass, 360×360 1Pass,360×360 2-1Pass,360×540 1Pass,360×540 2-1Pass Meaning: 360×180 1Pass:Print resolution on Y direction is 360dpi;...
Page 42
FY operation manual 360×180 2-1Pass:Print resolution on Y direction is 360dpi; Print resolution on X direction • is 180dpi, but it divided into two times to print. The amount of ink used is as much as 360 x 180 1Pass, it has better printing quality, but the speed is half of 360 x 180 1Pass. 360×360 1Pass:Print resolutions on Y direction and X direction both are 360dpi, the •...
FY operation manual Chapter 11 MAINTENANCE GUIDE 11.1 Preparation for the printer 1. Printer installation and power connection 2. Data cable installation and connection Plug in the data card (INFINITI Fast SCSI II Adapter Card) to socket of PCI on computer •...
Page 44
FY operation manual 1. Printer idle for a short time Set up Online Mode for Printer, in order to prevent print head clogged. 2. Printer idle for a day After working day, leave print head at Clean Position, turn off Air Valve, and cover the print head with a cap.