Infinity 6250LQ Operation Manual page 15

1. X-Move
Press ENTER key,
cause media move back and forth. Press ENTER key to confirm when move to the right location.
Y-Move
Press ENTER key, number
keys can cause print head move right-and-left. Press ENTER key to confirm operation.
2. Media Detect
Press ENTER key, print heads move on Y direction back and forth once to check a media, and then it
stops at original position. If "ERROR" displays on the LCD screen, you probably have neither a media
nor detect sensor installed (It is not available when the manual published).
3. Clean Position
Press ENTER key, number
move right-and-left. Commonly, set the clean position on left edge. Then press ENTER key to save the
information.
When you want to clean the print head and pump ink to ensure no nozzle-clogging, you can use this
function. After enters this function, number
key, print head will move to the defined cleaning position. Press
pressure automatically; Press
4. Print Position
Press ENTER key, number
move right-and-left. Set up a value as a start printing position, press ENTER key to save the
information. When you print an image or print test drawing, they start at this position.
5.2.2 Clean Tools
MENU
M2
OFFINE
1. Clean All
Press ENTER key, print heads move to Clean Position and ink sprays automatically with negative
pressure.
2. Purge Ⅱ
Press ENTER key,
prevent the nozzles clogging. Flashing will automatically disappear after the completion of the operation.
Press the ENTER key again, and print head will spray ink again. In this mode, ink amount is medium.
3. Purge Ⅲ
Press ENTER key,
prevent the nozzles clogging. Flashing will automatically disappear after the completion of the operation.
Press ENTER key again, and print head will spray ink again. In this mode, ink amount is more than
Purge II. Purge Quantity from Options can set the ink amount.
FY operation manual
Move
flashes on and off on the LCD screen. Press
XXXX
flashes on and off on the LCD screen. Press /
XXXX flashes on and off on the LCD screen. Press /
key, start to purge once.
XXXX
flashes on and off on the LCD screen. Press /
Clean All
Purge Ⅱ
Purge Ⅲ
jet
flashes on and off on the LCD screen. Print head sprays ink automatically to
jet
flashes on and off on the LCD screen. Print head sprays ink automatically to
XXXX
flashes on and off on the LCD screen. Press FUNC
- 15 -
/ key of the arrow keys can
key of the arrow
key, print heads
key, start to clean with negative
key, print heads