Table of Contents
Advertisement
360×180 2-1Pass：Print resolution on Y direction is 360dpi; Print resolution on X direction
•
is 180dpi, but it divided into two times to print. The amount of ink used is as much as
360 x 180 1Pass, it has better printing quality, but the speed is half of 360 x 180 1Pass.
360×360 1Pass：Print resolutions on Y direction and X direction both are 360dpi, the
•
amount of ink used is double of 360 x 180 1Pass.
The same principle is applied for the rest modes.
•
b. Select unidirection or bidirection. Bidirectional printing is more efficient than unidirection's.
5) In Figure 10-3-3, press "Calibration", install corresponding curves.
6) In Figure 10-3-2, press "Print" button to print
See " RIP User's Manual" for more functions and descriptions.
Note: If you want to cancel a task during printing, you may use the RIP software to do so. If you prefer to
cancel a task on Printer, you need wait until "Printing Cancel" displays on Menu (Printer now is on Offline
Mode).
FY operation manual
Figure 10-3-6 Set up advanced parameters
- 42 -
Advertisement
Table of Contents
