Kenmore SWA/RS 10101 Owner's Manual page 50

48
Buttonhole guide
Make the Buttonhole
1. a. Carefullymark the buttonholelength on
your garment.
b. Mount the buttonhole guide onto the
presser foot with the letter "F" at the
• front so that the rear edge of the presser
foot is at the end of the guide.
c. Insert the garment underthe guide with
the buttonholemarking running toward
you.
NOTE'.Line up the markings on the guide
with the length you have marked to
help you stitch accurately. Markings
are engraved in inches.
I'I,
2. a. Set the stitch selectorat ,',' .
b. Sew 4 to 6 stitches.
c. Stop sewing at the left stitch.
3. a. Set the stitch selector at ]1] .
b. Sew forward until you reach the front
marking of your buttonhole.
c. Stop sewing at the left stitch,
4. a. Set the stitch selectorat ,'.,'.
b. Sew 4 to 6 stitches.
c. Stop sewing at the right stitch.
5. a. Set the stitch selectorat lit .
b. Sew until you reach the back of the
buttonhole.
c. Remove the fabric and cut the hole
open with the buttonholeopenerin your
accessorybox.