Shell Stitch; Stitch Width Control - Kenmore SWA/RS 10101 Owner's Manual

I !
i
Shell Stitch
Top thread tension control Stitch width control Stitch selector
" "- _ , 7 1 0 -"
0 • 2--'_ • 6 • B __ 1 ' 2 ' 3 '--_' 5
S page17. _ _ 3-5<Greenr_n____ _._ _
Presserfoot
_ _ __St itch length control _-_'4 --
7 It:-' _ --_ _'11 "-
I // /7 # (_)It'
,,io-.i
_\ I __ I __ llln:l
\\\,\ _ .,o I _ -" • • ll-I_
Zigzag foot J I _ _ 12 or green range i
* Use this stitch to finish the edges, hems,
sleeves and neck opening of lingerie or
nightwear.
Form the shell stitch by sewing over the
folded fabric.
For best results:
1. You may need to tighten the top thread
tension slightly.
2. Allow the needle to just clear the folded
edge of the fabric when it zigzags.
NOTE: If you sew rows of shell stitches,
space the rows 1/2 inch apart.
Two types of shell stitches are built into your
machine:
_- Regular produces a
shell stitch which
tiny shell hem on lingerie and other
fine garments.
r>_t Two-point shell stitch to be used for
bigger size of shell pattern.
37