Preinclination - NEC Express5800/R320c-E4 Installation Manual

Chapter 2 Installing the Bundled Software

1.1.1 Preinclination

SNMP is used for reporting to NEC ESMPRO Manager. Provide settings for SNMP as shown below.
1. Log in to ftSys Management Appliance as a root user.
2. Edit the /etc/snmp/snmpd.conf.
Change the /etc/snmp/snmpd.conf, and, for ESMPRO MIB (.1.3.6.1.4.1.119.2.2.4.4), set a right of the
community in "READ WRITE".
In the example below, "READ WRITE" authority is given to all MIB (.1 subordinates) of default
community (public).
Example
####
# Third, create a view for us to let the group have rights to:
# name incl/excl subtree mask(optional)
#view systemview included .1.3.6.1.2.1.1
#view systemview included .1.3.6.1.2.1.25.1.1
view all included .1 80
####
# Finally, grant the group read‐only access to the systemview view.
# group context sec.model sec.level prefix read write notif
#access notConfigGroup "" any noauth exact systemview none none
access notConfigGroup "" any noauth exact all all none
3. Check the runlevel 3 and 5 of snmpd is on.
# /sbin/chkconfig --list snmpd
snmpd
- In the case of on, restart snmpd.
# /etc/init.d/snmpd restart
- In the case of off, change setting of snmpd, and start snmpd.
# /sbin/chkconfig --level 35 snmpd on
# /etc/init.d/snmpd start
4. Check the runlevel 3 and 5 of portmap is on.
# /sbin/chkconfig --list portmap
portmap
- In the case of on, it is not necessary to change setting of portmap.
- In the case of off, change setting of portmap, and start portmap.
# /sbin/chkconfig --level 35 portmap on
# /etc/init.d/portmap start
Express5800/R320c-E4, R320c-M4 Installation Guide (VMware)
Note
Refer to Help of snmpd.conf for detailed procedure. Run man command to open Help of
snmpd.conf.
0:off 1:off 2:off 3:on
0:off 1:off 2:off 3:on
1. Bundled Software for the Server
Modify these lines.
– Comment out the existing
description.
– Add new descriptions.
4:off 5:on 6:off
4:off 5:on 6:off
65