Sms (Text Messages) - Gigaset E630 User Manual

SMS (text messages)

SMS (text messages)
Your device is supplied ready for you to send text messages immediately.
Prerequisites:
u
Calling Line Identification is enabled.
u
Your network provider supports SMS within the fixed line network.
u
To receive SMS messages, you must be registered with your network provider.
This usually occurs automatically when you send your first text message.
Writing and sending SMS
Your system can send a linked SMS (made up of up to four individual SMS messages) as one
message. Linking occurs automatically.
Ë
¤ ¤ ¤
v
OK
¤
Entering SMS text (enter text and special characters,
¤ Press the Answer call key c or
¤
Send SMS to: Select number with dialling code (even if you are in that area) from the
directory or enter directly.
Please note
u
Phone numbers of at least one SMS centre must be saved in the device (
otherwise you cannot open the submenu New SMS.
If the SMS text cannot be displayed in full, you can navigate within the text using q.
u
The cursor can be placed within a text at the required position using p.
u
u
In the case of an external call, or if you interrupt writing by more than 2 minutes, the text
is automatically saved in the draft message list. If the memory is full, the SMS is deleted.
u
Sending SMS can result in additional costs. Please consult your provider.
Temporary storing of an SMS (draft message list)
You can temporarily store, change later and send SMS messages.
¤ ¤
Enter the text.
Opening an SMS from the draft message list
Ë
v ¤ ¤ ¤
OK
You can
¤
Read: read, then change or send the SMS
Or:
¤
Options: send, change, delete the SMS or delete the entire draft message list.
54
¤
New SMS OK
¤
Options
¤
Send
¤
q Save
Options
q Draft ¤ ¤ q Select entry.
OK
¢
page 18).
¤ q Send ¤
OK
¤
OK
¤
OK
¢
page 56),