Call Waiting - Gigaset E630 User Manual

Call Waiting

Many Telecommunication providers in Australia and New Zealand offer a Call waiting service on
your Home Phone Line. Please speak to your service provider to check if your Home Phone line
is activated for this service (charges may apply).
The most common providers instructions for Call waiting are as follows.
Please note
These processes depend on the network provider and are subject to change.
Australia:
Telstra:
To answer an incoming call when you're already on a call, or to switch between calls:
Press the Recall key S
u
To hang up on one call and return to the other:
Press the Recall key S on your phone and listen for the dial tone, then press .
u
To reject an incoming call when you are already on a call:
Push the Recall key S on your phone and listen for the dial tone, then press Q again.
u
For more information please contact Telstra.
Optus:
You are on the phone and hear the beeps.
To put the first caller on hold and talk to the new caller (the caller on hold will hear nothing):
Press the Recall key S on your phone.
u
To return to the first caller:
Press the Recall key S and put the new caller on hold. You can alternate between the calls
u
in this way.
Or
u
Hang up the first call. The phone will ring again with the second caller. This means that you
will not be able to go back to the first caller.
For more information please contact Optus.
New Zealand:
Telecom NZ:
You are on the phone and hear four beeps.
To talk to the second caller:
Press the Recall key S on your phone.
u
To return to the first caller:
Press the Recall key S again and you will be able to continue your original conversation.
For more information please contact Telecom NZ.
and listen for the dial tone, then press 2.
?
Making calls
21